|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
08-25-2004, 05:22 PM
|
#1 |
|
Member (8 bit)
Join Date: Nov 2002
Location: Boston MA USA
Posts: 214
 |
LED fan for my P4 2.4
I want to get a LED fan for my P4 2.4. I have no idea, what to look for. Can someone help? Thanks!
|
|
|
|
08-26-2004, 10:12 AM
|
#2 |
|
Resident Intel Fanboy
Join Date: Mar 2004
Location: Cincinnati
Posts: 1,669
|
what type of heat sink do you have? The stock one from Intel? Or are you asking about a case fan? A little more info is needed. If you're just looking for a standard 80MM case fan (which will work on some aftermarket heatsinks if that's what you've got) look at
SVC FrozenCPU Xoxide Any of those are reputable e-tailers that deliver in the US (I've used em all, some are cheaper on one thing than another)
__________________
...wide is the gate, and broad is the way, that leadeth to destruction, and many there be which go in thereat... |
|
|
|
|
08-26-2004, 11:07 AM
|
#3 |
|
Member (8 bit)
Join Date: Nov 2002
Location: Boston MA USA
Posts: 214
|
i have the stock one form intel. Is has two clips that hold it down. I dont know much about these things,
|
|
|
|
|
08-26-2004, 11:14 AM
|
#4 |
|
Resident Intel Fanboy
Join Date: Mar 2004
Location: Cincinnati
Posts: 1,669
|
I don't *think* you can put a new fan on the stock intel heatsink, as it's attached with some plastic clips, versus screws like an aftermarket HSF. You could always order a new heatsink that takes an 80mm fan and get an LED fan for it.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
