|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
09-22-2004, 11:35 AM
|
#1 |
|
Member (2 bit)
Join Date: Sep 2004
Posts: 2
|
System config crash after installing HD
Hi all,
Today I tried to install a Western Digital Caviar (120 GB) but for some reason it doesn't seem to get *completely* recognized. When I boot and the system configuration is shown I get the following: Code:
Pri. Master Disk: LBA, More 4, Next to this, the floppy and CD-ROM drive both fail to boot after connecting the hard drive, making it rather difficult to flash the BIOS, which could help with recognizing the drive (the motherboard is quite old, an MSI BXMaster). If anyone could help me I would really appreciate it! |
|
|
|
09-22-2004, 11:59 AM
|
#2 |
|
Professional gadfly
Join Date: Jan 2002
Location: Minneapolis, MN
Posts: 6,364
 |
Are you installing the drive as secondary, or will it be your primary drive? What is the configuration of the IDE channels? How are all the drives jumpered?
|
|
|
|
|
09-22-2004, 01:07 PM
|
#3 |
|
Member (2 bit)
Join Date: Sep 2004
Posts: 2
|
It's supposed to be the primary drive.
As for the IDE channels, I have both the CD and the hard drive on one cable (in IDE1) on the motherboard. The jumpers of the HDD are set to master, on the CD they are put on slave. Is that what you mean? Edit: I flashed my BIOS and now the bootup doesn't crash anymore. Up to the next challenge! Last edited by prutz; 09-22-2004 at 05:39 PM. |
|
|
|
|
09-23-2004, 08:08 AM
|
#4 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 36,460
|
You are fortunate MSI had a bios update to recognize a drive that large!
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
