|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
09-23-2004, 05:22 PM
|
#1 |
|
Member (4 bit)
Join Date: Sep 2004
Posts: 13
|
Seagate HD with an External Enclosure
I have had a Mirco Plus MP-320U2 USB 2.0 External HDD Enclosure for a while now with a Maxtor 120GB HD and it has worked fine, except it was causing slow boot times. I wanted to switch that hard drive with my Seagate Barracude 7200.7 Model: ST3160023A 160GB HD.
I have every driver I can find for both installed, but when I plug in the external drive, windows does not recognize it. It doesn't even detect a unknown USB device. I tried plugging it into a Linux machine and it detects it. Any ideas why it wont work on my machine? Last edited by aKobrakai; 09-23-2004 at 06:26 PM. |
|
|
|
09-24-2004, 06:55 AM
|
#2 |
|
Ride 'em Cowboy
Join Date: Dec 1999
Location: Dallas, Tx
Posts: 9,018
|
Try different jumper settings on the drive. Set it to what ever the other drive was.
|
|
|
|
|
09-24-2004, 09:46 AM
|
#3 |
|
Member (4 bit)
Join Date: Sep 2004
Posts: 13
|
I have tried master (which is what the external enclosure says to use), slave and cable select.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
