DVD problem

[mystvearn]

I am not sure what is the problem, here is the problem

DVD-RW: TDK 1616N
Tried burning files(fill the capacity) on to a smartbuy DVD+r 8X, after 10% read, nero start smart said that I had an error, could not burn at 8X. The dvd clearly said 8 times, so I am left with a useless 119mb data which I could not open considering the files are 150+mb each.

Then I tried another disc, same brand, same files, but I disale multi session, speed of burning at 6X, and I still got the same problem as above. But now I have 600mb+ of useless data

the first time I got the error, the DVD when nuts, and I could only read cd's in the dvd writer. I don't know whats wrong. Here is the error log of the second burn

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
Nero version: 6.6.0.0 (Nero Express)
Recorder: Version: 2.78 - HA 1 TA 1 - 6.6.0.0
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: Version: 5YS3 - HA 1 TA 0 - 6.6.0.0
Adapter driver: HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3120026A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX175A1 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TDK DVDRW1616N atapi Port 1 ID 1 DMA: On
DiskPeripheral : Promise 1+0 Stripe/RAID01.10 fasttx2k Port 2 ID 0 DMA: Off
DiskPeripheral : Promise 1+0 Stripe/RAID01.10 fasttx2k Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
SONY CD-RW CRX175A1 G: CDRom0
TDK DVDRW1616N H: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572324kB)
Free physical memory: 849MB (869948kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.11.2004
ISO compilation
7:05:20 PM #1 Text 0 File Isodoc.cpp, Line 6170
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

7:05:20 PM #2 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2

7:05:20 PM #3 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2

7:05:20 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

7:05:20 PM #5 Text 0 File Writer.cpp, Line 122
Writer TDK DVDRW1616N running

7:05:20 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

7:05:20 PM #7 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-at-once, using DVD media

7:05:20 PM #8 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2294335 (509:51.10, 4481MB)

7:05:20 PM #9 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

7:05:20 PM #10 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: TDK DVDRW1616N, Media type: DVD+R

7:05:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:05:20 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2294336 (2294336) = #2294336/509:51.11
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294336 blocks [TDK DVDRW1616N]
--------------------------------------------------------------

7:05:21 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [TDK DVDRW1616N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4698800128, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2294336 | lead-out | 1 | 0x00 | 0x41

7:05:21 PM #14 Phase 24 File dlgbrnst.cpp, Line 1861
Caching of files started

7:05:21 PM #15 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.

7:05:21 PM #16 Phase 25 File dlgbrnst.cpp, Line 1861
Caching of files completed

7:05:21 PM #17 Phase 36 File dlgbrnst.cpp, Line 1861
Burn process started at 6x (8,310 KB/s)

7:05:21 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:05:21 PM #19 SCSI -1066 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x039B8000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

7:05:21 PM #20 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2

7:05:21 PM #21 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2

7:05:21 PM #22 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in EEPROM, command version 2

7:05:21 PM #23 Text 0 File DVDR.cpp, Line 4674
Drive: TDK DVDRW1616N
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM

7:05:21 PM #24 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 9:35,424 (575424ms) -> OK

7:05:21 PM #25 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes

7:08:15 PM #26 SCSI -1093 File Cdrdrv.cpp, Line 1429
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0B8A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0x73 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

7:08:15 PM #27 CDR -1093 File Writer.cpp, Line 311
No seek complete

7:08:16 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:08:16 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

7:08:16 PM #30 SCSI -1135 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

7:08:17 PM #31 SCSI -1176 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03

7:08:17 PM #32 Phase 127 File dlgbrnst.cpp, Line 1861
Generating DVD high compatibility borders

7:08:17 PM #33 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK

7:08:17 PM #34 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in RAM, command version 2

7:08:17 PM #35 Text 0 File DVDR.cpp, Line 5379
Booktype counter: 500, Booktype selected in RAM, command version 2

7:08:17 PM #36 Text 0 File DVDR.cpp, Line 4674
Drive: TDK DVDRW1616N
Booktype request: DVD-ROM, write to RAM
select Booktype setting from RAM

7:08:17 PM #37 CDR -1135 File WriterStatus.cpp, Line 171
Write error
TDK DVDRW1616N\H1 T1

7:08:17 PM #38 TRANSFER -24 File WriterStatus.cpp, Line 171
Could not perform end of Disc-at-once

7:08:17 PM #39 Text 0 File dlgbrnst.cpp, Line 1719
Set remaining time: 0:00,000 (0ms) -> OK

7:08:17 PM #40 Phase 38 File dlgbrnst.cpp, Line 1861
Burn process failed at 6x (8,310 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec)

Also:
1. in win explorer, the DVD-rw shows up as "CD DRIVE". I think this should be DVD-RW
2. http://img.photobucket.com/albums/v3...earn/error.jpg
3. Firmware was 2.78. Flashed to 2.c8

Because the 1st DVD(119mb) is a open cd, I tried to burn files on it again, even though I will not get 4.7gb. Just around 10% of the burn process,everything failed again. like the case before, so I think there is a problem

[glc]

Try different media.

[mystvearn]

I tried a Duraplus CD-rw 10x, i manage to burn a full cd content, but when verification, it says that data failed to verify. the verification problem occurs at the end of the process.
Could twisted IDE cables be the problem? I bend the cables so that the insides look neat.

This problem occurs after 1 week of not using the pc. Just got back from holiday, and the pc's messed up. The pc is locked up, so no one could open it/use it. Not sure if the pc was tumbled down by the cats. A person comes during the holidays to make sure the house is ok

Well the problem of the dvd-rw showing up as CD-DRIVE is back again when I open explorer. I think that is my problem, though I don't know what/hot to fix it. Anyone knows how to fix this

[mystvearn]

I tried my far cry dvd and doom3 dvd, it works. But trying my buned smartbuy azodisc dye, does not work. Tried empty smartbuy also does not work.

[glc]

That's still pointing towards bad or incompatible media.

Is DMA enabled on all your IDE controllers?

[mystvearn]

Originally Posted by glc That's still pointing towards bad or incompatible media. Is DMA enabled on all your IDE controllers?

DMA is enable, onbard the master and slave of second ide(the CDRW-master, DVDRW-slave).
Autorun on.
I have burned 10 DVD's of the same brand before, and its ok, the problem started when I tried burning another DVD, but I made it multisession. Someone said don't do it, so I have not done multisession again. But even though before, it read the media which was burned, but after trying it again few times, it would not read the media. I have no idea why this happens. i have wasted 3 dvd's. no point to waste more.


that suppose to be DVD-RW. When I double click, says "H:\ Is not accesible, incorrect function"

[bailey]

my gut feeling is telling me that the drive is going bad, but its just a guess.

[mystvearn]

The cd-drive only changes when I place in a DVD+r media in it. Don't know why. When I place a DVD+rw/r, the DVD-RW changes to CD-DRIVE. So its reading like I have placed a cd in it. I did managed to force copy an entire disc, but even when I place a dvd+rw media, it says do you want to copy a cd

[Rick Hall]

Are you sure you have NERO set for DVD and not for CD?

[mystvearn]

yes, checked that. Also notice the pic above, when I insert DVDr it coes out dvdrom. I tried my cd-rw on both drives both came out as cd-rw, so the cdrw is functioning

[mystvearn]

Does OC destroys the DVD? well its no use, tried at another pc still the same, looks like back to the shop. and bought it for less than 2 months.