|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
12-05-2004, 01:25 AM
|
#1 |
|
Member (5 bit)
Join Date: Jul 2004
Posts: 26
|
IDE Drive Cable Slave / Master attachments
This is my 2nd build. I have a cable that specifies the slave attachment. Does this really matter. It creates a messy fit and would be easier and neater if I was able to attach the Slave connection to the Master hard drive. What I have works and the drive is formatting as I type but the airflow will be restricted when all is closed up.
|
|
|
|
12-05-2004, 01:27 AM
|
#2 |
|
Red-eyed Moderator
Staff
Premium Member
Join Date: Dec 1999
Location: Regina, Saskatchewan, Canada
Posts: 17,525
|
When using the 80 wire cable, ALWAYS set both drives to cable select and the master drive MUST be on the end of the cable and the slave MUST be on the middle connection.
__________________
-At Ford, quality is job #1, job #2 is making them explode. ~Norm MacDonald, SNL News -Switching to Glide..Balancing in my head..inside of me... taking the glide path instead. |
|
|
|
|
12-05-2004, 01:34 AM
|
#3 | |
|
Member (5 bit)
Join Date: Jul 2004
Posts: 26
|
Quote:
|
|
|
|
|
|
12-05-2004, 01:38 AM
|
#4 |
|
Remember
Join Date: Jun 2001
Location: MO
Posts: 1,478
|
"Rounded cables."
http://www.frozencpu.com/cgi-bin/fro...nu_search.html |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
