|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
01-23-2005, 05:58 PM
|
#1 |
|
Member (5 bit)
Join Date: Nov 2002
Location: Essex,England
Posts: 31
 |
Beep Sounds
This is only a small problem but it is driving me mad. Can anyone tell me why me newly installed fully working and stable Abit AN7 Motherboard just constantly beeps through the case speaker although there appears to be nothing wrong in any way. Is it just a feature of this particular board or is there a way of turning it off through bios. At the moment i have diconnected the speaker lead. Rest of the system is AMD 3200+ barton. WinXP SP2, 1GB Crucial 400mhz DDR ram, 2x80gig seagate Hdds.
Also my cpu temps seem quite high with stock heatsink+fan, about 60degrees at normal work loads. |
|
|
|
01-23-2005, 06:11 PM
|
#2 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 36,460
|
That's an overheat warning. You need to check your heatsink mounting and your case airflow.
|
|
|
|
|
01-27-2005, 05:57 PM
|
#3 |
|
Member (5 bit)
Join Date: Nov 2002
Location: Essex,England
Posts: 31
|
beep sounds
Thanks GLC for the advice will be checking the hardware this weekend. Sorry about the delay in replying. Much appreciated
|
|
|
|
|
01-28-2005, 05:45 PM
|
#4 |
|
Member (5 bit)
Join Date: Nov 2002
Location: Essex,England
Posts: 31
|
Thanx glc that seemed to have done the trick didn't have enough paste on the heat sink between the cpu. All is well now thankx again. I bow to your superior knowledge.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
