|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
02-07-2005, 03:54 PM
|
#1 |
|
Member (8 bit)
Join Date: Sep 2004
Posts: 144
|
p4 2.8 ok to use with JET 4?
Hey all
I just bought a JET 4 CPU heatsink from cooler master. I have an Intel 2.8 cpu. On the heatsink case it reads "INTEL P4 3.6 GHz and higher" would this matter? I havent even tried to install it and was just wondering if it would aculy perform on my pc? -Thx agen 
|
|
|
|
02-07-2005, 04:03 PM
|
#2 |
|
Shiro Usagi
Premium Member
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
|
As long as it's made for the socket type your P4 is, it should work fine.
Is your 2.8GHz P4 a Socket 478 or a Socket 775? I think I may have read somewhere that that particular heatsink is pretty noisy but doesn't seem to cool that well. Cricket
|
|
|
|
|
02-07-2005, 05:12 PM
|
#3 |
|
Member (8 bit)
Join Date: Sep 2004
Posts: 144
|
Reply
Yes, It is a socket 478
|
|
|
|
|
02-17-2005, 10:22 AM
|
#4 |
|
Anime:Any-may
Join Date: Sep 2002
Location: Kota Bharu, Malaysia
Posts: 2,447
|
it will perform. But the best air cooler AFAIK has to be the zalman copper, with fan. Where the copper fins protude out to the fan, making the fan placed in the middle. Any copper heatsink will be good enough. With my current setup, the tornado is doing a good job at 50C
__________________
CPU: Intel E-5200. Graphics: Saphire Radeon 4770 HD 512 MB. Motherboard: Gigabyte GA-EP43-DS3L. Memory: Corsair XMS2 Xtreme Performance 4 GB ( 2 x 2 GB ), Chasis: Antec Three Hundred. PSU: Corsair CX400W. Optical Drive: Sony Optiarc SATA DVD +-RW. Storage: Seagate Barracuda 7200.12 500GB SATA. Peripherals: Dell E1905EP 19" UltraSharp LCD; LG M227WD (Dual screen), HP 4180 Printer, Canon S400SP Printer & Lide20 Scanner; Philiphs HP 890, Edifier MP230. OS: Win 7 (64 bit). Laptop: Toshiba Satellite M50 Last edited by mystvearn; 02-17-2005 at 10:28 AM. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
