how to install heat prob tempure thing

[jgt8229]

i got this case http://www.thermaltake.com/xaserCase/xaser3/v2000a.htm
and i was wondering how to put the heat sencer under the processer and the heatsink like it says too because on the 939 sockets wouldnt it like be blocking the pins from going in the cpu holder

[jgt8229]

hahaha sorry if my explaintion is bad

[jgt8229]

any help for me? lol

[mjkovis]

Originally Posted by jgt8229 i got this case http://www.thermaltake.com/xaserCase/xaser3/v2000a.htm and i was wondering how to put the heat sencer under the processer and the heatsink like it says too because on the 939 sockets wouldnt it like be blocking the pins from going in the cpu holder

Dont the new AMD 64 Socket 939 processors have a temerature diode or thermo diode built into them?

Also, try to be patient with your thread. Someone will get to you as soon as they can. You can also edit your posts within 12 hours, so your second post you could have edited your first post instead of making another post. Just thought I would point that out to you.

AK

[mystvearn]

You can place it under the CPU, depends on how thick it is. If you are not sure, or affraid it will interupt the heat transfer, place it at the nearest point on the heatsink near the CPU. If possible, do not use tape, or any adhesive material, just shove it in. Don't press the sensor, it is not meant for that.