|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
05-12-2001, 08:16 AM
|
#1 |
|
Member (8 bit)
Join Date: Feb 2001
Location: St-Jean sur Richelieu Quebec Cda
Posts: 153
|
cpu multiplier question
I am starting preparation for my first pc build.
In a book that i have bought, it is said to set cpu multiplier. How does one do that? I am building piii 800eb with asus cusl2-c mobo. |
|
|
|
05-12-2001, 09:39 AM
|
#2 |
|
Member (7 bit)
Join Date: Mar 2001
Posts: 103
|
The CPU multiplier times the fsb(front side bus) equals the external cpu frequency. In your case it would be 8.0x100. Unless you plan to overclock you should leave the multiplier alone. The multiplier is already set when you purchase a processor.
|
|
|
|
|
05-12-2001, 09:43 AM
|
#3 |
|
PC Tinkerer
Join Date: Aug 1999
Location: Long Beach, Mississippi
Posts: 2,090
 |
Intel CPU's are multiplier locked. It doesn't matter what you set the multiplier to, it is only gonna run at 8x if that is the 100 MHz CPU, or 6x if that is the 133 MHz CPU. Most boards now days have all the adjustments made in BIOS, with very few, if any, jumpers on the MB. Your BIOS setup program should automatically detect the proper multiplier and set it for you anyway.
|
|
|
|
|
05-12-2001, 09:51 AM
|
#4 |
|
Member (8 bit)
Join Date: Feb 2001
Location: St-Jean sur Richelieu Quebec Cda
Posts: 153
|
attn redalert
attn jenny thanks for the info. going to build the first one now. wish me luck |
|
|
|
|
05-12-2001, 10:45 AM
|
#5 |
|
Member (13 bit)
Join Date: Mar 1999
Posts: 6,789
|
In your case, since it's an 800 "EB" cpu, the multiplier runs at 6x and the bus at 133mhz. On Intel PIII's, just an "E" indicates the cpu is a coppermine and runs at the 100mhz. "B" indicates the cpu runs at the 133mhz bus. "EB" indicates the cpu is a coppermine PIII and runs at 133mhz. HTH
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
