|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
05-13-2001, 11:36 AM
|
#1 |
|
Member (6 bit)
Join Date: May 2001
Location: New Hampshire
Posts: 51
|
no video display box
im back,i got the mobo in,up & running.but,i have no control over my video controls.its stuck in 640 x 380 i think.every time i try to open my display panel it blinks,BUT DOESNT OPEN, and freezes JUST MY my toolbar.it wont even let me make changes in my device manager. im running a IWILL 266R MOBO-ATI RAGE FURY PRO 32MEG. T-BIRD 900,128 CAS2 RAM,WEST-DIG HARD DRIVE 6.4GIG.I unlocked the t-bird how do i find out if its really unlocked? Thanks for all helped recieved,oh yea i deleted the H_KEY_LOCOLMACHINE ENUM THING, WHATEVER ITS CALLED, LIKE YOU GUYS TOLD ME TO DO BEFORE I INSTALLED THE NEW MOBO
|
|
|
|
05-13-2001, 12:45 PM
|
#2 |
|
Member (13 bit)
Join Date: Mar 1999
Posts: 6,789
|
Are both your both your motherboard chipset drivers and video drivers properly installed? HTH
|
|
|
|
|
05-13-2001, 01:03 PM
|
#3 |
|
Member (6 bit)
Join Date: May 2001
Location: New Hampshire
Posts: 51
|
As far as i can tell?The device manager seems like it has all drivers.I even went to my hardweares site and down loaded updated drivers
|
|
|
|
|
05-13-2001, 01:09 PM
|
#4 |
|
Member (13 bit)
Join Date: Mar 1999
Posts: 6,789
|
Go ahead and uninstall them (drivers) and remove the key again. Then remove all your other cards except video, install the drivers again (for video card, chipset), and then add the cards back in one at a time and install their respective drivers, to see if that helps.
P.S. You are using a pretty new motherbard and fairly old videocard, there could (although I hope not) be compatiblity issues with the chipset and that videocard. |
|
|
|
|
05-13-2001, 08:50 PM
|
#5 |
|
Member (6 bit)
Join Date: May 2001
Location: New Hampshire
Posts: 51
|
still trying,a older vid card?
Well,this card is really not that old.Its agp 2.0 compliant and 4x/2x bus.I guess i could write to tech support.If any one has any ideas please let me know.I might try removing everything again,yuck that bites.I even tried a older card for kicks,VELOCITY 4400.Same thing happened.Oooh,the light just came on,hello!You might be on to something,the RAGE FURY PRO IS OVER A YEAR OLD.I guess they aren't like stereo equipment were everything is compatable.Oh gezzzzz there goes another couple hundred.
|
|
|
|
|
05-13-2001, 08:55 PM
|
#6 |
|
Member (13 bit)
Join Date: Mar 1999
Posts: 6,789
|
I guess it could maybe just be a driver issue, I'd contact Iwill and ATI first and ask if there are any known bugs and/or fixes before you buy a new videocard.
|
|
|
|
|
05-13-2001, 10:24 PM
|
#7 |
|
Member (6 bit)
Join Date: May 2001
Location: New Hampshire
Posts: 51
|
found problem,now another
Well it looks like we have a compatability issue.My vid card wont allow display setting to change when MS NETMEETING IS INSTALLED,I TRIED REMOVING NET MEETING but i dont think it removed totally. WHAT NOW?How can i totally remove it?
|
|
|
|
|
05-14-2001, 02:03 AM
|
#8 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 36,453
|
Add/remove programs, Windows Setup, communication, uncheck netmeeting and reboot.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
