|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
03-18-2005, 05:05 PM
|
#1 |
|
Member (5 bit)
Join Date: Dec 2004
Posts: 30
|
Third DVD CD Burner.......
I built my own computer , it has an Asus p4c 800-e deluxe mobo. I have one sata hard drive, one dvd drive attached as master to the end of the cable and a cd burner as slave to the other plug on the same cable. This cable with these two drives are attached to the primary ide. I want to attach a third drive, dvd burner on its own cable to the secondary ide.
My question is, how do I set the jumpers for these three drives? Or is this even possible? Thanks anyone ....... Dan |
|
|
|
03-18-2005, 05:08 PM
|
#2 |
|
Ride 'em Cowboy
Join Date: Dec 1999
Location: Dallas, Tx
Posts: 9,018
|
If the first two on the primary are working don't touch em.
The new drive should be master or cable select...
__________________
Stand Up 2 Cancer - SU2C |
|
|
|
|
03-18-2005, 05:41 PM
|
#3 |
|
Member (5 bit)
Join Date: Dec 2004
Posts: 30
|
The other two work fine
The other two work fine. Their jumpers are on cable select and they are drive d and e so I assume that the new drive will auto pick up f.
I can change the letters though in xp disk manager. Thanks for that info, I just have to wait on newegg now for delivery. I had never done that before and just wasn't sure. Dan |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
