|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
08-04-2005, 12:51 AM
|
#1 |
|
Member (4 bit)
Join Date: Aug 2005
Posts: 8
|
Mouse driver fails to install
alright I have a windoes xp:he.I had updated my windows and my mouse worked fine.It is a optical micro innovation mouse ps/2. I updated my bios and soon after i believe my mouse did not work although it was powered.I check to see if there was any driver errors and there was no driver. So i download my driver install and no driver was there.When that didn't work i used system restore and still at the same place and reinstalled a generic driver and nothing.I have a intel d845pesv motherboard.
|
|
|
|
08-04-2005, 11:12 AM
|
#2 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 36,460
|
Have you tried a different mouse?
|
|
|
|
|
08-04-2005, 01:04 PM
|
#3 |
|
Member (4 bit)
Join Date: Aug 2005
Posts: 8
|
yes tried several ps/2 mouses,still nothing.
|
|
|
|
|
08-04-2005, 07:37 PM
|
#4 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 36,460
|
Do you have a USB mouse you can test with? Your PS/2 port may be shot. If you updated your bios, maybe you should use the jumper to clear CMOS, reset the date/time, and load factory bios defaults.
|
|
|
|
|
08-04-2005, 09:32 PM
|
#5 |
|
Member (4 bit)
Join Date: Aug 2005
Posts: 8
|
reset it all and the mouse did not work.While at the 'welcome login screen', i held down f1 forgetting that i needed to be reboot to get into the bios screen and the mouse arrow moved down and to the corner and then i was able to move the mouse. 0_o ah well, all is well and i'm not complaining.Thanks!
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
