|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
09-18-2005, 12:33 PM
|
#1 |
|
Member (3 bit)
Join Date: Sep 2005
Posts: 5
|
Monitor Won't On!
I just recently bought an ATX computer case and I transfered all my computer insides from my old ATX case, to the new one. The fans on the computer on's, I can also hear the hard drive going on too. I don't hear the usual beep from the computer when you on it, and nothing shows up on my monitor. I think it has something to so with my button board on my motherboard. I read my motherboard manual and installed it correctly, but still, i got nothing!
|
|
|
|
09-18-2005, 01:15 PM
|
#2 |
|
Shiro Usagi
Premium Member
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
|
Follow the troubleshooting instructions in this thread...you must remove the motherboard from the case when doing this...you're trying to determine if the motherboard is shorting/grounding out to the case. Make sure you don't have extra standoffs installed in the motherboard mounting tray...whatever standoff installed must line up to the motherboard mounting holes (the holes with the metal ring around them). Any extra ones have to be removed from the mounting tray.
 Cricket
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
