|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
12-15-2005, 01:02 AM
|
#1 |
|
Member (6 bit)
Join Date: Sep 2005
Location: los angeles, CA
Posts: 52
 |
!!!!!help please!!!!
hey guys i want overcloc my system.....i have a asus a8n-sli deluxe, amd 64 4000(2.4), ocz 2x 512 gold Ram pc 3200 ddr 400, and the program that mange the ocing is ai booster from asus, is anybody familiar with this program or components.....i was trying to do it, what i did was change the external frequency of the cpu fron 200 mhz to 220 after that the screen freezes....what am i doing wrong, and please dont ask me why i want to overclock.....thanks in advance..
|
|
|
|
12-15-2005, 01:51 AM
|
#2 |
|
Supergeek in training
Join Date: Apr 2004
Location: UK
Posts: 1,690
|
Return the CPU's FSB back to stock. Sounds like the motherboard chipset can't go at the faster speed. What brand and wattage PSU are you using in your setup? It can also be that the PSU can't give enough power to sustain the overclock.
__________________
Pure geek and proud. "Success is not final and failure is not fatal. It is the courage to continue that counts." - Winston Churchill ------------------------------------------------------------------------------------------------- |
|
|
|
|
12-15-2005, 02:16 AM
|
#3 |
|
Member (6 bit)
Join Date: Sep 2005
Location: los angeles, CA
Posts: 52
|
psu+ seasonic 600 sli......help..:-)
|
|
|
|
|
12-15-2005, 07:25 AM
|
#4 | |
|
Member (10 bit)
Join Date: May 2002
Location: MS
Posts: 828
|
Quote:
is that psu on the nivida approved sli psu list.....
__________________
R.I.P. #21 Sean Taylor 1983-2007 GONE BUT NOT FORGOTTEN |
|
|
|
|
|
12-15-2005, 08:10 AM
|
#5 |
|
Telcom Tech
Join Date: Feb 2002
Location: Western, Pa.
Posts: 5,409
|
You may have to use the clear cmos jumper on the motherboard to get the settings back to default so you can boot the PC up again..
__________________
If it ain't broke, "TWEAK IT" |
|
|
|
|
12-15-2005, 02:10 PM
|
#6 |
|
Tweak Monster
Staff
Premium Member
Join Date: Sep 2003
Location: indiana
Posts: 3,595
 |
you need to set the HT multiplier to 4 or even 3 (default is 5)
the reason it froze is the HT went out of sink...it's rated at 2000 and it runs that stock ( 5 x's 200 = 1000 x' s 2 (double pumped)= 2000) so at 220 it was 5 x's 220 = 1100 x's 2 = 2200 It may not like that very much...also put the ram on a divider.... put the HT multi on 4...that will be good for 250 fsb... try the ram on a 5:4 divider or 266
__________________
MSI 890GXM-G65 mATX/1075t/Patriot DDR3-1600 2x8gb /WD 640 aaks 95mb/s /XFX 5830/Zalman9700nt/ Thermaltake TP750w modular New Build (on Hold) Intel 3770k / Gigabyte Z77-UD5H New Build AMD FX-8350 / Gigabyte 990FX-UD5 / Asus 5970X2 GPU |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
