|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
02-06-2006, 07:23 PM
|
#1 |
|
Member (11 bit)
Join Date: Jan 2002
Location: british columbia canada
Posts: 1,361
|
100 gig sata
Hello
Ive just put a new build together, im trying to load windows xp ive put the boot order to boot to cd first it runs through to the point of starting to load windows ,but then says cant find hard drive.I see it in the bios as it loads ,100 gig sata drive, is there something i need to be doing to direct windows to this drive? I also put the drive second in hte boot order. Thanks for all replies |
|
|
|
02-06-2006, 07:35 PM
|
#2 |
|
Shiro Usagi
Premium Member
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
|
Specs please.
 Cricket
|
|
|
|
|
02-06-2006, 07:40 PM
|
#3 |
|
Member (11 bit)
Join Date: Jan 2002
Location: british columbia canada
Posts: 1,361
|
Asus k8v-mx
lg dvd burner 100 gig maxtor sata windows xp pro |
|
|
|
|
02-06-2006, 07:50 PM
|
#4 |
|
Member (11 bit)
Join Date: Jan 2002
Location: british columbia canada
Posts: 1,361
|
Do I have to configure the raid first?
|
|
|
|
|
02-06-2006, 07:56 PM
|
#5 |
|
Member (11 bit)
Join Date: Jan 2002
Location: british columbia canada
Posts: 1,361
|
Thanks, figured it out, had to change raid to sata in the bios.
|
|
|
|
|
02-06-2006, 07:58 PM
|
#6 |
|
Computing Professor
Staff
Premium Member
Join Date: Jun 2001
Posts: 11,639
|
Pull out the manual for that motherboard and it will tell you how to setup the bios to recognize a single SATA drive. It's also possible that the drive must be on a particular SATA connector, 0 instead of 1, for everything to work.
I think you need drivers with a via board when use SATA, whether or not it's RAID, but I'm not sure so check the manual for that as well.
__________________
Asus M4A77D, 64 X2 6000+, 4 GB Corsair DDR2 800 ram, Radeon 5770. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
