Focus or tracking error

[nokiafan05]

I get this when I try to burn a DVD now out the blue and I don't know why either. When I do a Simulate everything is fine. I get no error's.I have no problems with a Drag and Drog Disc either.I just tested that out to rule it out.

Voyager

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.26 (Nero Express)
Recorder: Version: A103 - HA 1 TA 1 - 6.3.1.26
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: Version: A103 - HA 1 TA 1 - 6.3.1.26
Adapter driver: HA 1

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L020J1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MPE3064AT atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 I: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 99MB (101800kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.2.2006
ISO compilation
11:01:43 PM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

11:01:44 PM #2 Text 0 File Reader.cpp, Line 126
Reader running

11:01:44 PM #3 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4163B running

11:01:44 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

11:01:44 PM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

11:01:44 PM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2148751 (477:30.01, 4196MB)

11:01:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

11:01:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR008
Disc Application Code: 64, Disc Physical Code: 193

11:01:44 PM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:01:44 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2148752 (2148752) = #2148752/477:30.2
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2148752 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

11:01:44 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4400644096, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2148752 | lead-out | 1 | 0x00 | 0x41

11:01:44 PM #12 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

11:01:44 PM #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

11:01:44 PM #14 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

11:01:44 PM #15 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 8x (11,080 KB/s)

11:01:44 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:01:44 PM #17 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 6:42,842 (402842ms) -> OK

11:01:44 PM #18 Text 0 File DVDR.cpp, Line 2020
Recording mode: Sequential Recording Mode

11:01:44 PM #19 Text 0 File Mmc.cpp, Line 20698
Set BUFE: supported -> ON

11:01:44 PM #20 Text 0 File DVDR.cpp, Line 2161
Start write address at LBA 0
DVD high compatibility mode: Yes

11:01:44 PM #21 Text 0 File Cdrdrv.cpp, Line 8228
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 00 10 20 40 00 00 - 00 00 00 21 00 00 00 00 .0...@.....!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:01:44 PM #22 Text 0 File DVDR.cpp, Line 4643
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

11:02:16 PM #23 Text 0 File Cdrdrv.cpp, Line 1297
23:02:16.875 - HL-DT-ST DVDRAM GSA-4163B\H1 T1 : Queue again later

11:10:20 PM #24 SCSI -1039 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05A80000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x1D 0x18 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x34 0x00 0x0C 0x09 0x01

11:10:20 PM #25 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error

11:10:20 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:10:20 PM #27 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

11:10:20 PM #28 Text 0 File DVDR.cpp, Line 2403
EndDAO: Last written address was 1906815

11:10:20 PM #29 Text 0 File DVDR.cpp, Line 4643
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request: DVD+R
Book Type setting not supported for the loaded disc type

11:10:20 PM #30 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

11:10:20 PM #31 CDR -1039 File WriterStatus.cpp, Line 164
Focus or tracking error

11:10:20 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

11:10:20 PM #33 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

11:10:20 PM #34 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 12:12:26 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 1, size=91136 bytes, created 9/7/2004 4:27:22 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 1, size=28544 bytes, created 9/7/2004 4:27:38 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 1, size=5760 bytes, created 9/7/2004 4:29:08 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2505 (xpsp.040806-1825), size=95616 bytes, created 12/31/2002 7:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)