|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
02-19-2006, 10:47 AM
|
#1 |
|
Member (14 bit)
Join Date: Mar 1999
Location: Christmas, Florida
Posts: 10,654
|
usb controllers and hubs
my p4p800 motherboard has 4 usb host controllers, and 5 usb hub controllers listed in the device manager which gives me 8 usb ports.
the usb ports are all 2.0 I have a self powered usb 1.1 8 port hub connected to one of the ports of the motherboard, many of my usb devices are still usb 1.1, and connected to the self powered hub, and as I understand it, the motherboard port reverts to a 1.1 port. now my question is if I buy a self powered 2.0 usb hub, and I connect it to another port on the motherboard, will I then have one hub working at 2.0 and another hub working at 1.1 ? |
|
|
|
02-19-2006, 12:36 PM
|
#2 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 36,460
|
I would think so as long as you use a port that's not on the same pair.
|
|
|
|
|
02-19-2006, 01:03 PM
|
#3 |
|
Member (14 bit)
Join Date: Mar 1999
Location: Christmas, Florida
Posts: 10,654
|
that would be great, so I guess I will buy a new 2.0 self powered hub and give it a try.
thanks for the reassurance on this. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
