|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
07-22-2001, 01:22 AM
|
#1 |
|
Member (9 bit)
Join Date: Sep 1999
Location: 38:31:58.292N 93:31:35.900W
Posts: 258
|
Overclocking pIII 1gig on ASUS
Can I safely over clock my coppermine PIII 1gig chip using ASUS CUSL2-C mobo? I noticed in bios that I could change the core voltage and the frequency, but I'm not sure how much or were to set them at w/out damaging my cpu. Can I, or do I change one or both settings? Any suggestions would be helpful.
thank you....bob |
|
|
|
07-22-2001, 01:29 AM
|
#2 |
|
Member (14 bit)
Join Date: Mar 1999
Location: Christmas, Florida
Posts: 10,661
|
what are you running the buss speed at right now, and what speed of ram do you have?
let me word it another way. yes you can, but the buss will have to be jumped up a bit and the ram must be able to run at the the buss speed. Last edited by bailey; 07-22-2001 at 01:32 AM. |
|
|
|
|
07-22-2001, 01:57 AM
|
#3 |
|
Member (9 bit)
Join Date: Sep 1999
Location: 38:31:58.292N 93:31:35.900W
Posts: 258
|
Freq [133:133:33]
speed T2 core voltage 1.75 at 1000mhz |
|
|
|
|
07-22-2001, 09:33 AM
|
#4 |
|
Member (9 bit)
Join Date: Jul 1999
Posts: 313
|
Check this site out. ANYTHING you need to know about Overclocking that chip is there for the perusing.
__________________
BAITCASTER  A bad day of fishing is better than a good day of work !!!! Batteries NOT included ! Some assembly required. FEED YOUR MIND |
|
|
|
|
07-22-2001, 05:49 PM
|
#5 |
|
Member (13 bit)
Join Date: Mar 1999
Posts: 6,791
|
You also may wanna check the cpu database at www.overclockers.com to see what kinda speeds people have gotten while overclocking their 1ghz PIII. HTH
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
