|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
04-10-2006, 05:37 PM
|
#1 |
|
Member (8 bit)
Join Date: Jul 2004
Location: Davis-Monthan AFB, AZ
Posts: 151
|
Thermaltake Tsunami, ASUS A8N32-SLI, Zalman CNPS9500
Breaking it down this much might be hard to get a response but I'll try anyway. How well does this CPU Cooler fit on your mobo? Does it meet the space requirements? Also, does it fit when you have a side window mounted fan? According to http://www.zalman.co.kr/product/cool...D_754_eng.html, the chassis cover is barely high enough for clearance. If that's the case, I'd imagine you'd have to take the fan off and mount it on the outside of the case. Any available pictures would be appreciated as well
|
|
|
|
04-10-2006, 05:50 PM
|
#2 |
|
Wrench Bender
Join Date: Dec 2002
Location: Plymouth,MN
Posts: 5,949
|
You could measure from the motherboard base to the inside lip of the caseand see how much space there is. you will need around 5.5 " or 135mm. With a fan add another inch. If the outside width is 8" , may be able to keep the fan.
__________________
"When sliding down the banister of life; look out for splinters pointing up."
|
|
|
|
|
04-10-2006, 06:58 PM
|
#3 |
|
Member (8 bit)
Join Date: Jul 2004
Location: Davis-Monthan AFB, AZ
Posts: 151
|
Did a little netsurfing and found the answer
 
|
|
|
|
|
04-11-2006, 12:10 PM
|
#4 |
|
Member (7 bit)
Join Date: Jun 2005
Location: Valrico, FL (Tampa)
Posts: 92
|
I've got the same MOBO and the Zalman cooler, it fits with no problem at all. Unfortunately I can't help you out on the case.
~JEFF! |
|
|
|
|
04-11-2006, 12:35 PM
|
#5 | |
|
Member (8 bit)
Join Date: Jul 2004
Location: Davis-Monthan AFB, AZ
Posts: 151
|
Quote:
|
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
