|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
04-29-2006, 04:08 PM
|
#1 |
|
Member (5 bit)
Join Date: Aug 2005
Posts: 17
|
RAID config not recognised by Windows
Hi,
I have a few PATA HDDs that are installed and set up in RAID configuration (RAID 0/1) through the RAID utility at the start (Ctrl H). Amazingly, Windows explorer, nor the System Disk Manager see them! Why ? Ofreeb Last edited by Ofreeb; 04-29-2006 at 04:13 PM. |
|
|
|
04-29-2006, 11:02 PM
|
#2 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 36,460
|
Need system details.
|
|
|
|
|
04-30-2006, 04:35 PM
|
#3 |
|
Member (5 bit)
Join Date: Aug 2005
Posts: 17
|
It's sorted now. That was a problem with the driver I think...
So the BIOS RAID utility could see the drives but not the disk manager. When I reinstalled the driver a few times, in the end I could see these drives through a utility under Windows and then in the Drive manager. I did not put any detail of my system because I have encountered this problem twice before with different mobos, CPUs and HDDs... So I thought it wasn't really relevant. But thanks ! |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
