DVD Burner Fried?

[Spithead051]

I'm tyring to burn DVD's with my DVD burner and for some reason it says there is a "session fixation error" when it tries to finish burning. What could be causing this? I have been burning alot of DVD's lately and maybe the thing finally died. I have no clue. I do have a log from one of the failed burners. Any help would really be appreciated.

[not important]

I looked around on a lot of different burning forums and the general reply seems to be:
Try a different brand of Media
Update the firmware
Clean the lense
Replace the drive.
HERE is a list of Atapi errors. Sorry I couldn't be more precise.

[glc]

1. Does your CD-RW still work?

2. Download the latest update to Nero 6 and install it.

3. Make sure the IDE controllers are in DMA mode.

[Spithead051]

I already updated the firmware and Nero. The CD-RW does not work, but it can read DVDS/CDs. It is set in DMA Mode. The only thing I haven't tried was cleaning the lens. Also, with the media I tried the same files with the same DVD on a different burner and it worked fine. So, it is not the media or the files.

[glc]

So - *NO* burner works in that computer? Will either of your burners work in another computer?

[Spithead051]

Oh, the CD Burner works, I thought you meant the CD-RW on the DVD Burner. The CD Burner works. I haven't tired putting the DVD burner in another computer however.

[glc]

If the CD burner works but the DVD burner doesn't, with fixation errors, it's most likely the DVD burner is shot. It *might* just be a dusty lens, you can try a cleaning CD in it.

[Spithead051]

The DVD burner died, so I bought a new one and now it works. I appreciatte the help everyone gave me.