|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Member (4 bit)
Join Date: Apr 2007
Posts: 9
|
I'm trying to upgrade my Windows XP Pro version 2003 to SP2. I need the USB ports to use DSL so I can get the update. My computer refuses to let me install USB 2.0 driver that came with my motherboard drivers claiming SP1 or SP2 already has these drivers. How can I get this driver installed without running into this issue?
(note: I don't have an internet connection for the computer because of the USB issue)(Note: I have already wiped and reinstalled windows, installed all my motherboard drivers that I am able to, under device manager I have yellow question marks next to Universal Serial Controller, PCI bus, and unknown(I'm guessing it's my HDA bus driver or AC 97...that's a different issue)). (motherboard/computer hardware below) Windows XP Pro (version 2003) {trying to upgrade but driver issues preventing me from getting to the internet to download SP2} ASUS M2N32-SLI Premium Vista Edition Socket AM2 NVIDIA nForce 590 SLI MCP ATX AMD Motherboard - Retail AMD Athlon 64 X2 5600+ Windsor 2.8GHz Socket AM2 Processor Model ADA5600CZBOX - Retail Western Digital Caviar SE16 WD2500KS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM XFX PVT71JYHE9 GeForce 7950GT 512MB GDDR3 PCI Express x16 HDCP ExTreme Edition Video Card - Retail G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL4D-2GBPK - Retail Sony NEC Optiarc 18X DVD±R DVD Burner With 12X DVD-RAM Write Black E-IDE / ATAPI Model 7170A-0B - OEM |
|
|
|
|
|
#2 |
|
Kickin' it
Staff
Premium Member
|
Why do you need your USB ports to connect your DSL? Can you plug the modem or router directly into your PC with an ethernet cable to get online temporarily?
__________________
Fold for PCMech: Team 13761 |
|
|
|
|
|
#3 |
|
Member (4 bit)
Join Date: Apr 2007
Posts: 9
|
The quest DSL disk doesn't detect an ether card (even though it's built into the motherboard) and I'm guessing thats also part of my issue.
|
|
|
|
|
|
#4 |
|
Member (11 bit)
Join Date: Apr 2003
Location: Iowa
Posts: 1,652
|
Make sure you have the driver installed for the NIC and use that to get the Service Packs. I would use the Ethernet Connection anyway.
__________________
LP |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| need to get high speed 2.0 usb driver | DarkPacMan77 | Build Your Own PC | 13 | 01-09-2007 06:58 AM |
| Unable to enable direct3d under DX9.0c... Im stumped are you? | TrutHgIVER | Home Theater, Audio, and Video | 4 | 11-16-2006 11:17 PM |
| USB 1.0 To USB 2.0 USING PCI CARD | rhjoiner | Computer Hardware | 2 | 10-11-2004 06:08 PM |
| via serial ata driver disk | i486 | Windows Legacy Support (XP and earlier) | 4 | 08-30-2004 08:07 AM |
| Won't boot with USB 2.0 card | larrymoencurly | Computer Hardware | 2 | 01-02-2003 02:27 AM |