|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
11-25-2007, 03:51 PM
|
#1 |
|
Member (7 bit)
Join Date: Dec 2006
Posts: 83
|
Help with booting a Biostar T7025 Mobo
I was sitting listening to music and when I went to change to a different file my sound went out. I couldn't figure out what was going on, I couldn't even open up the volume control. So I restarted my PC and now it just sits on the screen saying " verifying DMI pool data". It normally goes to that screen but quickly moves on. Any ideas what is going on. I am using a Biostar T7025 Mobo. It is all in my signature.
Also one other thing, ever since I built the PC when I boot it stops at the screen before the DMI pool data screen and I have to press F1 to continue, didn't know if that was standard fare. Usually PC's just continue into your desktop right? Thank you ahead of time
__________________
Thermaltake Tsunami Dream/E6400 Core 2 Duo 2.13GHz/eVGA 7600GT KO/ASUS P5B Mobo/Hiper 580w PSU/Corsair 2x1G DDR2 667 Memory/WD 500G 7200rpm HDD/Pioneer DVD burner Coolermaster Centurion/Athlon 64 X2 4000+ Brisbane 2.1GHz/Biostar T7025 Mobo/Thermaltake Purepower 500w PSU/G Skill 2x1G DDR2 800 Memory/Samsung 500G 7200rpm HDD/Seagate 500G 7200rpm HDD/Lite-On SATA DVD burner |
|
|
|
11-25-2007, 10:19 PM
|
#2 |
|
Member (7 bit)
Join Date: Dec 2006
Posts: 83
|
So took my PC over to my buddy's house and we hooked up his HDD with an OS on it and it worked, but still no sound. The HDD of mine that had the OS on it still showed up and so I copied the files and brought it home. I was getting ready to reformat the HDD and install Windows again because we figured it was a OS problem. I put in my Windows disk and booted it and windows showed up. I thought that was weird so I took the CD out and turn on the computer w/o the disk. Everything worked. Went to my desktop and everything was there and the sound worked fine.
Any ideas about what is going on? Thanks |
|
|
|
|
11-25-2007, 10:27 PM
|
#3 |
|
Shiro Usagi
Premium Member
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
|
Gremlins.
 Cricket
|
|
|
|
|
11-26-2007, 07:22 AM
|
#4 |
|
Member (7 bit)
Join Date: Dec 2006
Posts: 83
|
Crap, I hate gremlins, especially when they get wet and start oozing that puss stuff everywhere. Have you ever tried to get that stuff out of couches and carpet? Impossible.
|
|
|
|
|
11-26-2007, 08:44 AM
|
#5 |
|
Tweak Monster
Join Date: Sep 2003
Location: indiana
Posts: 2,914
 |
sounds like it could be many things....
try doing a boot of minimal hardware....see if you havent got something getting ready to die and it's causing conflicts... As for the F1....if you dont have a floppy drive hooked up and you have it enabled in the bios it will hang on the post screen until you hit F1.... If you have a floppy drive then F1 means it's booting in safe mode for the bios and you have a setting boogered......  good luck
__________________
MSI 890GXM-G65 mATX/1075t/G-Skill DDR3-1600 2x4gb /WD 640 aaks 95mb/s /XFX 5830/Zalman9700nt/ Thermaltake TP750w modular ECS P55 Black Edition/i7-860/Geil Black Dragon 2x2gb 12800-ddr3/Asus 5970X2 vid card/2x640 AALS-Raid-0/Corsair TX-850w |
|
|
|
|
11-27-2007, 12:33 AM
|
#6 |
|
Member (7 bit)
Join Date: Dec 2006
Posts: 83
|
Max thanks for the F1 tip worked like a charm. I don't really know what to do about the boot problem. It hasn't happened since and I think it is a OS problem cause everything worked when my buddy booted it w/ his HDD. I guess I'll wait and see.
Thanks for your help |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Dual Booting on Gigabyte Mobo | windowgazer | Computer Hardware | 3 | 09-05-2007 11:10 PM |
| PLEASE HELP! MoBo Probs :( | vödka | Computer Hardware | 7 | 08-20-2004 01:05 AM |
| Abit AN7 mobo not booting up | fleaman | Computer Hardware | 7 | 03-05-2004 05:05 PM |
| mobo in hp | shulsey | Computer Hardware | 3 | 07-08-2002 01:42 PM |
Linear Mode
