|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
05-28-2008, 03:32 PM
|
#1 |
|
Member (6 bit)
Join Date: Feb 2008
Posts: 32
|
temps?
anyone know approx. what telps i should be getting out of a x3350 (e9450) @ 400 x 8.
i am getting at idle core 0 = 55c core 1 = 45c core 2 = 36c core 3 = 36c temps don't move much under load. none ever go above 58c even in prime95. think i just have an a chip from a bad batch (core 0 is soooooo hot) or is this expected? maybe i just put to much thermal paste on. it's hard to tell how much to put on. i pretty much just put a blob (about maybe .5 cubic centimeters) on the center of the chip and slapped on the heatsink. oh i'm using an asus silent knight cooler. thanks 
|
|
|
|
05-28-2008, 03:42 PM
|
#2 |
|
Member (6 bit)
Join Date: Feb 2008
Posts: 32
|
one other thing
both core temo and cpuid hardware monitor give identical readings.
|
|
|
|
|
05-29-2008, 11:45 AM
|
#3 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 36,460
|
The proper way to apply heatsink compound is spread a paper-thin layer over the whole top of the CPU.
|
|
|
|
|
05-29-2008, 08:08 PM
|
#4 |
|
Member (4 bit)
Join Date: May 2008
Posts: 12
|
Thermal paste can be tricky, I find less is better. CPU's are usualy safe up to pretty high temps but the lower the better.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| e4300 temps are back up? | bd1886 | Computer Hardware | 4 | 08-31-2007 03:50 PM |
| CPU temps too high? | Phil1ip | Computer Hardware | 14 | 08-29-2007 11:46 PM |
| cpu video card temps | ssahl | Computer Hardware | 2 | 06-10-2006 01:00 PM |
| Cpu temps on new Gateway (Pentuim D 820) | Audiaddict | Computer Hardware | 1 | 08-30-2005 12:59 AM |
| amd temps | newme | Computer Hardware | 20 | 09-14-2002 01:24 PM |
Linear Mode
