|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
10-29-2009, 11:40 PM
|
#1 |
|
Member (8 bit)
Join Date: Dec 2004
Posts: 201
|
Belarc Advisor System Specs
I ran Belarc and it stated that my Bus Clock = 200 MHz. (I have Gigabyte M57SLI-S4 w/1000 MHz FSB.) Does this mean that my FSB is not configured correctly (ie. too low) in my BIOS? I looked at FSB setting in my BIOS and it goes from 200-500 MHz and AUTO. It has been set on AUTO and Optimized BIOS Settings are the default.
|
|
|
|
10-30-2009, 09:23 AM
|
#2 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 36,460
|
Belarc is reporting the base bus speed, which is correct.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
