|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Member (6 bit)
Join Date: Nov 2005
Posts: 46
|
Fan Rattling
I recently purchased an Antec 1100 case and the top 200mm rattles and thus quite loud, to the point I had to unplug it form the power.
Any suggestions on what i could do to fix it? I submitted a ticket to antec but I'm not really expecting much. |
|
|
|
|
|
#2 |
|
The Preacher Man
Premium Member
Join Date: Apr 2000
Location: Dallas
Posts: 5,161
|
What I do is unscrew the fan from case but leave it plugged in. Even if have to hold it, turn on PC and see if still rattles (bearings or blades unbalanced). If ok and original screws were tight I'd use 4 flat rubber washers like in a plumber's kit from local hardware store or home center. Pretty basic stuff. Good luck. Btw, if you google "antec 1100 fan noise", there is some info to ponder and consider.
__________________
"Don't be so open-minded that your brains fall out." Last edited by SARGE; 03-28-2013 at 11:44 PM. |
|
|
|
|
|
#3 |
|
Techphile.
Join Date: Nov 2003
Location: San Francisco Bay
Posts: 6,546
|
Given it is still under warranty wait for Antec send you a replacement. There is no practical fix for it since fans are so relatively cheap making them disposable items when they don't work. There really isn't any fixing of the bearing, balancing the blades or replacement of the motor.
__________________
Asus P8P67 WS Revolution | Intel 2600K @ 4.7 GHz | Win 7 Pro 64 |8 gigs Corsair 1600 | Two Diamond 6990's in Crossfire| Corsair AX1200 | Thermalright Silver Arrow | Western Digital Black 2TB 64 meg cache | Lian-Li PC-A71B | Logitec Z-5500 | Three Asus 26" VW266H monitors running under Eyefinity | Last edited by David M; 03-29-2013 at 09:44 AM. |
|
|
|
|
|
#4 |
|
Staff
Premium Member
Join Date: Sep 2004
Location: Cardiff, Wales. UK
Posts: 6,555
|
If you place your hands flat down on the metal of the case around the fan does the noise disappear or dissipate in any way?
__________________
Niwa no niwa ni wa, niwa no niwatori wa niwaka ni wani o tabeta. |
|
|
|
|
|
#5 |
|
Member (6 bit)
Join Date: Nov 2005
Posts: 46
|
If i place my hand down on the case the rattle does dissipate.
I took the fan out of the case, it still rattles. If i turn it over and use it as an intake fan there is no rattle. Still waiting to hear something from antec. Last edited by CanadienDude; 03-29-2013 at 10:54 AM. |
|
|
|
|
|
#6 |
|
Staff
Premium Member
Join Date: Sep 2004
Location: Cardiff, Wales. UK
Posts: 6,555
|
That to me sounds like the fan blades are out of balance and the case is suffering a little "panel boom" as we call it over here, the steel of the case is vibrating and making the noise worse. I would wait for Antec and if you get no joy from them just buy a better quality fan to replace it with.
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|