Can I overclock pcchips mobo

[needhelp]

My pcchips M741LMRT motherboard has a slot1 and a socket370 on the board so that I can run with PPGA Celeron chip or the SEPP slot1 Celeron chip or in fact the Intel Pentium II or Pentium III processors with clock rates from 233MHz to 550MHz for the Pentium processors and clock speeds from 266MHz to 466MHz for the Celeron processors. (It cant run both processors at the same time) Now I was looking through the manual for the m/b and I can only change the bus speed fromm 66MHz to 100MHz (Depending on whether I am installing Pentium or Celeron processor)Celeron clocked at 66MHz of course. In the manual for the m/b there are no other jumper settings that can be changed for the various processors speeds. Reading the manual tells me that all Celeron processors are automatically configured using firmware and All processors configured by CPU plug and play. Now does that mean that I cannot manually change the clock speed for the processors other than 66MHz or 100MHz. If that is the case then it is not possible to overclock with this motherboard. Is that correct. In other words it woud appear that there are no manual multiplyers that can be changed by any jumpers on the board.

[highrisemech]

From the information you provided it looks like you can't overclock with this board, although you may want to check your bios set up for soft menu settings this will allow you to edge up the FSB for the cpu.