|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
02-20-2002, 08:36 AM
|
#1 |
|
Member (9 bit)
Join Date: Dec 2001
Location: Bournemouth
Posts: 275
|
Amr Modem And Slot
how does an AMR MODEM and ARM MODEM slot work, my mother board came equipt with a AMR slot so i bought the modem card, how ever the computer does not auto detect the card nor can i get to manully find it, the card came with no drivers and the mother board bois has nothing that i can find to switch the slot on if it is set to off. can anyone help me out here?
cheers matt |
|
|
|
02-21-2002, 01:23 AM
|
#2 |
|
Member (9 bit)
Join Date: Mar 2001
Posts: 461
|
ewww....
Honestly, ditch the AMR(Audio Modem Riser) Modem and get a good PCI modem or even boardband. My custom computer I built cae with one of those pieces of junk. It combines the audio and modem in one card/modem or whatever. It is slow and cheap. Trust me on this one!
|
|
|
|
|
02-23-2002, 07:33 PM
|
#3 |
|
Member (12 bit)
Join Date: Nov 2001
Location: Woodland Hills, CA (suburb of Los Angeles)
Posts: 4,014
|
Hi mattmorgan
While ja83's post is probably true, depending on the phone line conditions in your area, (and the fact that you've already bought an AMR modem), it can be cost-effective and relatively speedy to use an AMR modem. [My wife surfs at 49.3k and downloads at 52k with an ultra-cheap AMR from PCtel & an old K6-III]. Some questions: What motherboard? What AMR modem? What Operating System? Many of these "software" modems require that you load the software first, and follow some fairly exact procedures to have the detection & install go well. Post back with some more info & we'll see if we can get you going. ...Gary |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
