|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
03-01-2002, 02:12 AM
|
#1 |
|
Member (10 bit)
Join Date: Nov 2001
Location: NW Indiana
Posts: 705
|
US Robotics External modem
The wife brought a modem home from work yesterday that was marked bad. They said if I want it I can have it. It's a US Robotics Sportster External 33.6 Faxmodem. No drivers, manuals or anything. I hooked it up and it works. Great. It connects at 28.8. Problem is that it won't hang up. Leaves the phone line open. I have to physically unplug the phone line from the modem to get the phone line to hang up. Can this be fixed? I know nothing about external modems.
Dip switch settings: 1. Data terminal ready 2. Verbal result codes 3. Display codes 4. Echo offline commands 5. Higher if specified in NVRAM 6. Carrier detect normal 7. Load NVRAM defaults 8. Dumb mode Model number: 00083907 OS: Win2K |
|
|
|
03-01-2002, 01:51 PM
|
#2 |
|
Member (10 bit)
Join Date: May 2000
Location: PA USA
Posts: 1,004
|
Modem
Hi Bosco: I think I would start by going to US Robotic's site & downloading the latest drivers for that unit. Then go to your modem properties in control panel and make sure it is configured properly.Next go to the Connections tab in Internet Options and check that this is configured properly.
Trudy |
|
|
|
|
03-01-2002, 10:48 PM
|
#3 |
|
The Preacher Man
Premium Member
Join Date: Apr 2000
Location: Dallas
Posts: 4,710
|
ctrl-alt-del, select RNAAPP and end task. That will release the line w/o rebooting. There are other variables, but I've never had the problem with any modem. Unless you're using a 3rd party software to connect, are you right clicking the little green icon in bottom tray, then selecting disconnect? That should be all you need to do. If it doesn't work, see plan A.
__________________
The bigger the government, the smaller the citizen Last edited by SARGE; 03-01-2002 at 10:57 PM. |
|
|
|
|
03-02-2002, 02:26 AM
|
#4 |
|
Banned
Join Date: Feb 2002
Location: in harms way
Posts: 2,768
|
Number 7 in the dip switch settings sounds like a good place to start.
|
|
|
|
|
03-02-2002, 09:28 AM
|
#5 |
|
Member (9 bit)
Join Date: May 2000
Location: Asia-Singapore
Posts: 449
|
Why not just contact the 3COM helpdesk ? I just contacted them abt the exactly same US Robotics 33.6 faxmodem, and after going through their friendly helpdesk support at the Philipines, a sweet lady went through the troubleshooting, and confirmed it was spoiled, and they had a new one sent to us, after we have sent the spoilt one to their collection centre. Not bad support from them .
|
|
|
|
|
03-04-2002, 03:18 AM
|
#6 | |
|
Member (10 bit)
Join Date: Nov 2001
Location: NW Indiana
Posts: 705
|
Quote:
It dosen't work at all now. I think it's shot. It was worth a try. |
|
|
|
|
|
03-04-2002, 04:06 AM
|
#7 |
|
Member (9 bit)
Join Date: May 2000
Location: Asia-Singapore
Posts: 449
|
It's worth a try, seems nothing to lose. Anyway, as long you've got the serial number, don't think they would bother, whether you've bought it or someone gave it to you.And if I'm not mistaken, US Robotics says their modem are life-time warranty-As far as I can remembered. I remembered for my case, they didn't ask me when I bought it. And it's not cheap to get a quality modem like US Robotics either .
|
|
|
|
|
03-05-2002, 05:29 PM
|
#8 |
|
Banned
Join Date: Jan 2001
Location: Toronto
Posts: 298
|
Compressed air
I had one do that and all that was wrong was that the ports had some dust in them.Try using some compressed air to blow them out...you never know worth a try..
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
