|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
03-07-2002, 03:19 AM
|
#1 |
|
Member (7 bit)
Join Date: Feb 2002
Posts: 107
|
Need Advise on installing drives
Hi All!!
Im going to be building my PC very soon, my question is how should i install the hard drive and CDrom drive. I have a ABIT KT7A-RAID board that is XP ready and it has 4 IDE inputs. 3 and 4 are the red ones for the RAID or the Ultra ATA-100 im not doing a RAID setup only one 30gig 7200RPM hard drive. The board has the HTP 370 RAID controller on board. Do i put the HDD on IDE 3 and make it the master and the CDrom on IDE 1 and make it the master? Thank's all for your time!!! Nemises.... |
|
|
|
03-07-2002, 03:49 AM
|
#2 |
|
Banned
Join Date: Jul 2000
Location: Bakersfield,CA
Posts: 7,761
|
Put the hard drive on IDE1 or IDE3 as the Master and the CD-ROM on IDE2 as the master.
|
|
|
|
|
03-07-2002, 04:07 AM
|
#3 |
|
Member (13 bit)
Join Date: Oct 2000
Location: Scotland
Posts: 4,700
|
Hi Nemises,
See this link for great advice on settings for the KT7A http://www.viahardware.com/faq/kt7/kt7faq.htm HTH |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
