|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
04-28-2002, 05:08 PM
|
#1 |
|
Member (8 bit)
Join Date: Apr 2002
Location: East Coast, USA
Posts: 220
|
question about my case and cpu temps?
my cpu is a celeron 1ghz 100mhz fsb. my case is a generic one i got off of ebay. its a mid-tower case with a 300w psu. i will be upgrading to a full-tower antec case in a month. the temp my cpu is giving when idle is 31 c. on a full load, it goes to 43c. the temp on my case idle is 28 c. on a full load it goes to 31 c. are these temps decent? or should i try and cool them down some. i already have a thermaltake smart fan blowing air out the back of the case. i'm using the heatsink/fan that came with my celeron. any opinions would be much appriciated. thanks
|
|
|
|
04-28-2002, 05:37 PM
|
#2 |
|
Member (14 bit)
Premium Member
Join Date: Jan 2002
Location: The Great NorthWest
Posts: 12,594
|
Hi crowdaddy00,
Welcome to PC Mechanic!! Yes, those temps are just fine! TwoRails |
|
|
|
|
04-28-2002, 05:38 PM
|
#3 |
|
Member (12 bit)
Join Date: Sep 2001
Location: Racine, WI
Posts: 2,094
  |
Those temps are great. I wouldn't worry until your temps got well into the 50s, and then I would consider different cooling options. No need to worry.
Nate |
|
|
|
|
04-28-2002, 08:04 PM
|
#4 |
|
Member (8 bit)
Join Date: Apr 2002
Location: East Coast, USA
Posts: 220
|
thanks for all your help. i think i will upgrade my cooling options when i get my new case. thanks again
|
|
|
|
|
04-28-2002, 09:04 PM
|
#5 |
|
Red-eyed Moderator
Staff
Premium Member
Join Date: Dec 1999
Location: Regina, Saskatchewan, Canada
Posts: 17,576
|
CPU temps are great, case temps may be a bit warm, but if you're in a warm climate without airconditioning, there isn't much you can do about it. An extra fan to blow some more air through the case wouldn't hurt if you're concerned.
__________________
-At Ford, quality is job #1, job #2 is making them explode. ~Norm MacDonald, SNL News -Switching to Glide..Balancing in my head..inside of me... taking the glide path instead. |
|
|
|
|
04-29-2002, 04:58 PM
|
#6 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 37,770
|
The stock Intel fan is all a Celeron will ever need.
|
|
|
|
04-29-2002, 08:55 PM
|
#7 |
|
Sibak
Join Date: Feb 2000
Location: Houston, Texas, USA
Posts: 1,080
|
I agree; you're good to go!
Good Luck,
__________________
By knowing what we value We will know what we want And how to act in life |
|
|
|
|
05-02-2002, 02:32 PM
|
#8 |
|
Member (8 bit)
Join Date: Apr 2002
Location: East Coast, USA
Posts: 220
|
I also noticed that the pc is clocked at 1010ghz. is that right? Also the cpu core voltage is 1.8. i set it to 1.75 in the BIOS but MBM 5 says its at 1.8. I have 2 core voltage readings and both say 1.8v. thanks for all the help so far. just wanna make sure everything is ok. When I get home later today, i will tell you the other voltages on the pc. thanks again
|
|
|
|
|
05-02-2002, 05:46 PM
|
#9 |
|
Forum Administrator
Staff
Premium Member
Join Date: May 2000
Location: Joplin MO
Posts: 37,770
|
I would believe 1010 "M"hz............
 Unless you want to overclock, I would set the core voltage to AUTO and let it take care of itself. |
|
|
|
|
05-02-2002, 07:18 PM
|
#10 |
|
Member (8 bit)
Join Date: Apr 2002
Location: East Coast, USA
Posts: 220
|
i dont see an option to set the core voltage to auto in the BIOS. the other readings are
CPU - 1.81 +3.3 - 3.5 +5.0 - 4.92 +12.00 - 11.55 -12.00 - -11.55 -5.00 - -4.92 CPU - 1010mhz |
|
|
|
|
05-02-2002, 07:42 PM
|
#11 |
|
10th Level Vice President
Join Date: Jun 2001
Location: Knoxville, TN
Posts: 1,135
|
What motherboard are you using?
__________________
athlon 64 3000+ MSI K8T Neo-FIS2R MB, 1gig kingston hyperx cas2 pc3200 ddr, radeon 9800 pro, audigy 2 platinum, tdk 4xdvd+r, LG 52x cdrw, siig133ultra ata card, maxtor 133 ultra ata card, 160 gig WD HD converted into USB 2.0 drive, 80gig WD SE HD, 160 maxtor HD w/ 8 mb cache, 120 gig maxtor hd w/8 mb cache, 250gig wd w/8mb cache, 250gig Maxtor w/8mb cache, 8x samsung dvd-rw 2x KDS 19" monitors. 2nd Computer: 2.4 gig p4, Asus p3g8x motherobard, 512 samsung 2100 ddr, geforce 3 ti200, creative labs sound blaster 5.1live, 80gig IBM Hard drive. 52x CD-ROM,antec case, 15" generic monitor---thanks for alienwaredude. 3rd computer: AMD 2500+ XP FIC AN19C motherboard, 512 kbyte 2700ddr,geforce2ti200,4xdvd+-rw, antec case |
|
|
|
|
05-02-2002, 09:11 PM
|
#12 |
|
Member (8 bit)
Join Date: Apr 2002
Location: East Coast, USA
Posts: 220
|
i have a ASUS TUSLC-2
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
