|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
09-23-2002, 06:54 PM
|
#1 |
|
Member (4 bit)
Join Date: Nov 2001
Posts: 15
|
cd rom drive
how can i fix a cdrom drive that wont eject?
when i pess eject it just makes a Noise and stops |
|
|
|
09-23-2002, 07:06 PM
|
#2 |
|
Barefoot on the Moon!
Staff
Premium Member
Join Date: Aug 2002
Location: Northeastern USA
Posts: 13,285
|
I sounds like the gears are messed up so that the laser tray is raised and it is holding in the CD tray. What you could do is open it up and re-adjust the gears, but I wouldn't advise it unless you know what you're doing.
You could get a new Lite-On 52X for about $17. |
|
|
|
|
09-23-2002, 07:19 PM
|
#3 |
|
Member (4 bit)
Join Date: Nov 2001
Posts: 15
|
it's a dvd rom get it fix or buy new one
|
|
|
|
|
09-23-2002, 07:30 PM
|
#4 |
|
Shiro Usagi
Premium Member
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
|
Hi eric4179,
The repair cost will probably be more than the cost of a new DVD drive. You can get a nice DVD drive for around $43 from Newegg.com.  Cricket
|
|
|
|
|
09-23-2002, 09:04 PM
|
#5 |
|
Member (8 bit)
Join Date: Apr 1999
Location: North Potomac, MD; USA
Posts: 188
|
Use a paper clip and stick it in through the small tiny orifice infront of the CD-ROM tray of your computer and on pressing this the Cd will eject. Once it ejects. you close the door again and press 'EJECT" button. If it doesn't eject, then follow the instruction provided by Cricket. Force_Flow2002 previously.
Good Luck. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
