|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
09-28-2002, 10:47 PM
|
#1 |
|
Member (8 bit)
Join Date: Apr 1999
Location: North Potomac, MD; USA
Posts: 188
|
PS/2 Mouse not detected
I am attaching the PS/2 Mouse connector. The connector comes with connector but 4 cables green, yellow, red and brown. The manual shows the diagram of 1x5 Connector with numbering as follows:
Pin No. on the board 1 Data ----- Green 2 CLK ------ Yellow 3 GND ----- Red 4 NC 5 VCC ------Brown With this configuration, I got PS/2 Mouse not detected. Then I reversed the connector so that Brown cable connects to 1, 2 remains empty then Red, yellow & green for 3,4,5 respectively. Same message. Then I changed the mouse, No success. Please help me. I think the color code of the connector is wrong. I am not sure. I need help from teachers. Thanks in advance. |
|
|
|
09-30-2002, 08:55 PM
|
#2 |
|
Member (11 bit)
Join Date: Oct 2000
Location: Yorba Linda, CA
Posts: 1,159
|
Do you have the motherboard manual at hand. I remember doing this to my shuttle HOT-591P. What are the specs?
Edrod13 |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
