|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
11-21-2002, 06:54 PM
|
#1 |
|
Member (9 bit)
Join Date: Apr 2002
Location: ky
Posts: 375
|
Burn Test FAIL....
I purchased a PC Mech cd-r a few mths. ago and just reloaded win 98 installed all hardware run the burn test and got a "FAIL" result. I did have one thing fail and it was the floppy.
It ran 52 cycles, 2908160 Ops, found 1 error "Data Verify Faliure" Thats the only failure I had. how can I fix this? Thanks. |
|
|
|
11-21-2002, 06:59 PM
|
#2 |
|
Member (13 bit)
Join Date: Sep 1999
Posts: 4,956
|
Did you have a floppy in the floppy drive?
If you didn't,you'll get a fail as there's nothing for the floppy drive to read or write to. |
|
|
|
|
11-21-2002, 07:06 PM
|
#3 |
|
Member (9 bit)
Join Date: Apr 2002
Location: ky
Posts: 375
|
Yes Alfie .I didn't on the first run but noticed it and run it again and got same result
|
|
|
|
|
11-21-2002, 07:17 PM
|
#4 |
|
Member (13 bit)
Join Date: Sep 1999
Posts: 4,956
|
Try another floppy,does the floppy drive work,can you read and write to it?
If you can,I wouldn't sweat it too much! |
|
|
|
|
11-21-2002, 07:24 PM
|
#5 |
|
Member (9 bit)
Join Date: Apr 2002
Location: ky
Posts: 375
|
Ok. yes floppy works thought something else may be wrong.
thanks for the info. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
