A7V O/C

[Chhhhh]

Right now I'm running my T-Bird 750 @1100. BUt the lust for speed is driving me even farther. Right now I'm running on 11.0 x 100MHz.

I was wondering if anybody had experience with using a 133 FSB?

Thanks

[Xayd]

Ain't gonna happen.

Durons and TBirds are very shaky at higher bus speeds due to the cache timings on the CPU. The A7V mobo is even more picky about bus speeds.

I was able to get 105 on mine, but no more. I've seen reports of folks getting as high as 110 on their A7V's but 110 is the upper end.

Worth a shot, but your results with high bus speeds will be limited.

Xayd

[Omletteboy]

Duron and T-bird definitely don't like high fsb. There is likely no chance it will work on 133 fsb.

[Chhhhh]

Thanks guys

I'll stick to O/Cing by multiplier

[Alfie]

It's always possible to tweak the fsb.
If you look behind the primary ide connectors,you'll see a small chip marked ics.This small chip controls the fsb.Touch it,HOT!
Put a small heatsink on it.(Radio Shack has a cute one).
adding a little cooling to it allows(usually)for more play in the fsb area.
Try a 105 fsb to start off with (or 103). See if this holds.
If it does try for a little more.