|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
04-17-2003, 06:23 PM
|
#1 |
|
Member (3 bit)
Join Date: Apr 2003
Posts: 6
|
Boot problem!!!
guys!!!
i just put together a pc with a p4b266 asus board with an 80 gig hd, dvd-rom, etc... now...when i start up the computer everything starts ok and when i put the win me cd in it says " Disk Boot Failure. Please insert System Disk" I did the boot sequence order: 1) cd-rom 2) ide hd 3) floppy 4) other boot device. i did a search and some people had a similar problem but i can't seem to fix this!! heeeelllppp meeeee!!!!! thanks |
|
|
|
04-17-2003, 06:32 PM
|
#2 |
|
Shiro Usagi
Premium Member
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
|
Make sure the CD-ROM is jumpered properly for the type of IDE cable you're using.
Try another IDE cable. Do you have more than one optical drive? Is the CD-ROM the secondary master? Are you sure the CD-ROM drive works? Have you tried it in another computer?  Cricket
|
|
|
|
|
04-17-2003, 07:42 PM
|
#3 |
|
Member (10 bit)
Join Date: Dec 2001
Location: Marlette, Michigan
Posts: 523
|
Have you tried to you a floppy boot disk? Then install after it boots from the floppy.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
