|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
07-15-2003, 04:02 PM
|
#1 |
|
Member (2 bit)
Join Date: Jul 2003
Posts: 2
|
Warning! CPU has changed
I just finished building my PC:
Athlon XP 2500+ 333 fsb Asus A7n8x deluxe pc2700 512mb I start it up and get to the POST startup screen and I get the "Warning! CPU has changed" message. I also noticed at the top of the screen the cpu was at 1100 not 2500, am I supposed to go into the BIOS and change the CPU settings to the correct settings? And waht else am I supposed to change while I am in the BIOS? Thank you. |
|
|
|
07-15-2003, 04:32 PM
|
#2 |
|
Member (9 bit)
Join Date: Mar 2003
Posts: 262
|
You need to go into the bios and change the fsb from 100 to 166 this will give you the correct speed of the xp 2500
|
|
|
|
|
07-15-2003, 04:44 PM
|
#3 |
|
Member (2 bit)
Join Date: Jul 2003
Posts: 2
|
Thanks, I'll try that.
|
|
|
|
|
07-15-2003, 07:34 PM
|
#4 |
|
Member (10 bit)
Join Date: Jun 2003
Location: Virginia
Posts: 985
|
The Barton 2500 is actually a 1.8 gig CPU so after you change the the FSB in Bios to 166, it may only read 1830 on your screen and that would be correct if I am not mistaken.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
