|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
07-29-2003, 09:40 PM
|
#1 |
|
Member (11 bit)
Join Date: May 2003
Location: Houston, Texas
Posts: 1,340
  |
AIDA32 temp readings vs. BIOS
I just downloaded AIDA32 and its says my temps are
Motherboard-34c CPU-54c AUX-28c My Bios and the software that came with my motherboard gives these temps CPU-66c System-36c Which temps are more likely right? And also which temp from AIDA is my system temp?
__________________
Main: ASUS P5k SE/Core 2 Duo E6550/4x1024mb DDR2 800 GeForce 8600 GT 256MB/WD 36.7GB Raptor - WD 320GB x2 - WD - 750GB x2 - WD 640GB Laptop: Acer Aspire One AOA150 945GSE/Atom N270/1024mb DDR2 533/8.9" WSVGA/120GB HDD/2.3 lbs. HTPC: Shuttle K48 945GC/Pentium E2180/2x1024mb DDR2 800/80GB HDD/Vizio V37L 37" LCD 1080i Join us in the pcmech irc channel on undernet #Pcmech. |
|
|
|
07-30-2003, 01:44 AM
|
#2 | ||
|
Shiro Usagi
Premium Member
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
|
Re: AIDA32 temp readings vs. BIOS
Quote:
Quote:
 Cricket
|
||
|
|
|
|
07-31-2003, 01:14 AM
|
#3 |
|
Member (11 bit)
Join Date: Oct 2000
Location: Yorba Linda, CA
Posts: 1,159
|
For shoots and giggles, you could install Mother board monitor MBM and see if it gets closer to your bios's reading or if it agrees with the other third party software you are using.
|
|
|
|
|
07-31-2003, 10:35 AM
|
#4 | |
|
Member (11 bit)
Join Date: May 2003
Location: Houston, Texas
Posts: 1,340
|
Quote:
|
|
|
|
|
|
07-31-2003, 01:58 PM
|
#5 |
|
HOT ROD
Join Date: Sep 2000
Location: On the Edge
Posts: 4,565
|
You may need to configure MBM to read the right sensors and check to see if it is compatible with your mobo.
I have found that no matter what I use MBM, AIDA32 or Asus Probe they will always read lower that the bios reading, but AIDA32, MBM and Asus Probe all read the same temps. It seems that while in windows the cpu is not running at full speed but it is while in the bios.
__________________
Fast enough 2 get by.....old enough 2 know what not 2 try -You know it was me
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
