|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
08-19-2003, 07:36 PM
|
#1 |
|
Member (9 bit)
Join Date: Mar 2003
Posts: 262
|
How do i hook it up
For my birthday my friend gave me a heatsink for my processor and a 120mm case fan. Well i got the heatsink hooked up btu the 120 mm case fan has a black and a red wire comeing out of it. how do i hook it up. I dont know what model it is or anyhting. is there anyway i can get the fan to run
|
|
|
|
08-19-2003, 11:03 PM
|
#2 |
|
Member (10 bit)
Join Date: Jul 2002
Location: University of California, Santa Barbara
Posts: 800
|
Black is for ground, hook to a black wire from your PSU. Red is for 12v, hook it to a yellow wire from your psu.
You can solder them, make a plug for them using a regular molex connector (or any connector), or twist the wires together and seal with heatshrink/electrical tape (not recomended). |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
