|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
08-22-2003, 04:43 PM
|
#1 |
|
Canadian Content
Premium Member
Join Date: Dec 1999
Location: Vancouver Island , BC, Canada
Posts: 1,589
|
4 Pin ATX
I'm building a new system using the Asus P4S533-MX. Only i'm using a 2.4 Gig Celeron CPU.
The question is do I still have to connect the 4 Pin ATX +12V power plug?? It seems to be running fine without it. What is recommended, connected or unconnected?
__________________
The older I get, The better I was! |
|
|
|
08-22-2003, 05:12 PM
|
#2 |
|
Red-eyed Moderator
Staff
Premium Member
Join Date: Dec 1999
Location: Regina, Saskatchewan, Canada
Posts: 17,525
|
If your power supply has the connection, yes, use it... if not, the ASUS board should have the standard 4 pin molex available and that can be used as a substitute.
__________________
-At Ford, quality is job #1, job #2 is making them explode. ~Norm MacDonald, SNL News -Switching to Glide..Balancing in my head..inside of me... taking the glide path instead. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
