|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
09-27-2003, 05:16 PM
|
#1 |
|
Member (8 bit)
Join Date: Jul 2002
Location: Michigan
Posts: 220
 |
CPU cooling
Hey,
I got a new heatsink recently, thermaltake spark 7+, and its doing a real good job. I went from 58 celcius at full load to about 50 at full load. When i put on my heatsink i used the adhesive that came with the thermaltake. WOuld my temps still drop alot or just a little, liek 2-3 degrees, if i were to switch to artic silver. Im using a p4 2.4 btw. |
|
|
|
09-27-2003, 05:23 PM
|
#2 |
|
Aerospace
Join Date: Aug 2002
Location: MN, USA
Posts: 1,177
|
Well they would drop 2-3 degrees....but I thought that was alot
|
|
|
|
|
09-27-2003, 05:24 PM
|
#3 |
|
Member (14 bit)
Join Date: Mar 1999
Location: Christmas, Florida
Posts: 10,654
|
if your running 50 deg cecus with a p4 2.4 , then you gor something bad wrong, that cpu should be running at about 30 deg celc.
|
|
|
|
|
09-27-2003, 08:21 PM
|
#4 |
|
Member (11 bit)
Join Date: Aug 2003
Location: NJ
Posts: 1,099
|
Bailey, I think you meant 30C at idle. His temps are 50 at full load (which I think is normal, mine is 55C at full load).
__________________
P4 2.6C @ 3.12 || ASUS P4C800-E Dlx || Antec SOHO File Server w/ 5 case fans || Antec TruePower 430w PSU || 2 x 512MB Crucial PC3200 DDR || 280GB of total storage 7200rpm ATA100 8mb cache || LiteOn CDRW 52x32x52 || LiteOn DVD+/-RW SOHW-812S || WinXP Pro || Solarism 15" TFT LCD || 500VA TrippLite UPS || Logitech MX-700 Duo || ATI 9800 AIW || Sennheiser HD-555 |
|
|
|
|
09-27-2003, 09:43 PM
|
#5 | |
|
Computer Slave
Join Date: Oct 2001
Location: Connecticut
Posts: 1,564
|
Quote:
|
|
|
|
|
|
09-27-2003, 10:58 PM
|
#6 |
|
Member (11 bit)
Join Date: Aug 2003
Location: NJ
Posts: 1,099
|
So 30C is the normal? I thought that was low and the average temps at full load is around 40-45C. If that's the case, I think I'll buy a better HSF.
|
|
|
|
|
09-27-2003, 11:14 PM
|
#7 |
|
HOT ROD
Join Date: Sep 2000
Location: On the Edge
Posts: 4,565
|
50'C under a "full" load is fine, different cpu's with different stepping will differ on the temp and for the most part OCing a P4 by way of upping the FSB *should not* increase temps.
My P4 2.4C running @ full load is at 38'C while idle it's @ 29"C. I have 2 P4 2.4B's that differ on the temps, one is running at 45'C and the other is @ 40'C under a full load, both in identical cases and using the same case fan config. BTW all three are in the same room.
__________________
Fast enough 2 get by.....old enough 2 know what not 2 try -You know it was me
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
