|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
09-30-2003, 02:23 PM
|
#1 |
|
Member (5 bit)
Join Date: Oct 2002
Posts: 23
|
H.D. Wont Show In POST
My second hard drive was showing up correctly a few days ago. However, recently it hasn't been showing. It's supposed to be a Secondary Master, but everytime POST tries to detect it the H.D, it doesn't show. The second hard drive is Western Digital. Can someone provide me with an explanation and/or a symptom?
|
|
|
|
09-30-2003, 02:34 PM
|
#2 |
|
Member (10 bit)
Join Date: Aug 2003
Location: NJ
Posts: 815
 |
does it stop by during the detection, search for a bit, and then pass it by?
|
|
|
|
|
09-30-2003, 02:40 PM
|
#3 |
|
Computer Slave
Join Date: Oct 2001
Location: Connecticut
Posts: 1,564
|
Check to make sure the ribbon and power cables haven't somehow come loose from the drive.
|
|
|
|
|
09-30-2003, 08:59 PM
|
#4 |
|
Member (5 bit)
Join Date: Oct 2002
Posts: 23
|
My second hard drive detects fine now. I don't know why. I turned the power off, including turning off the switch behind the ATX case, making certain that the cables were in and they were. I turned the PC back on and the second hard drive detected perfectly. Don't know why. Well, thanks for replying.
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
