|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
12-04-2003, 04:15 PM
|
#1 |
|
Member (9 bit)
Join Date: Mar 2003
Location: Hasselt-Limburg-belgium
Posts: 289
|
no signal! on several mobo's
lo all,
a friend of mine is getting 'no signal' on mobo ... msi 745 ultra and asrock k7s8x we tried out different cpu's , videocards , soundcards , psu's and hd's nothing worked..at the end we resetted cmos by jumper-reset(didnt remove battery though)..didn't help anything ... are these mobo's compatible with athlon xp 2600+ or the 2400+ cause these cpu's i've used.... well he did i'm helping on remote ...  plss help cause all these ythings are brand new :'( this guy is totally freakin out offcourse , not knowing anything about pc's :s
__________________
Antec P182 , Corsair 520W modular , Asus P5K-E , Intel Q6600 Core2Quad , Corsair Twin2X 2GB DDR2 PC6400 CL5 , XFX GeForce 8800GTS Alpha Dog Edition , Maxtor 250GB SATA II 300 7200rpm 16mb , Samsung 2253bw |
|
|
|
12-04-2003, 04:21 PM
|
#2 |
|
Remember
Join Date: Jun 2001
Location: MO
Posts: 1,478
|
Did he try a different monitor? If he doesn't have another, maybe he could borrow one from a friend or family member.
The MSI board only supports up to a 2000+; I haven't checked for BIOS updates for it to see if it may support faster processors. |
|
|
|
|
12-04-2003, 05:25 PM
|
#3 |
|
Member (9 bit)
Join Date: Mar 2003
Location: Hasselt-Limburg-belgium
Posts: 289
|
can't be ...it ran a 2600 2 days before ...its a new board heh
monitors checked...didn't help us :s |
|
|
|
|
12-04-2003, 05:28 PM
|
#4 |
|
Member (9 bit)
Join Date: Mar 2003
Location: Hasselt-Limburg-belgium
Posts: 289
|
2600 ran on the msi before and 2400 on the asrok ..now we switched and get no signal on the msi with 2400 ....weird it is
cmos resetted ..didnt help |
|
|
|
|
12-19-2003, 04:34 AM
|
#5 |
|
Member (9 bit)
Join Date: Mar 2003
Location: Hasselt-Limburg-belgium
Posts: 289
|
well it stays unsolved i guess....even in the shop they didn't know it :s bad shop thus ..
all this on new hardware ppff, this friend of mine put together a new one again without faults, but what should we do with the other ones? we really don't know whats wrong...we can try a rma but in the shop they said it could take a long while, and maybe its better to look a bit further into this matter... what do u all think about this? |
|
|
|
|
12-19-2003, 05:28 AM
|
#6 |
|
Member (14 bit)
Join Date: Mar 1999
Location: Christmas, Florida
Posts: 10,654
|
try removing the cmos battery for 20 min and then replace it and reboot
|
|
|
|
|
12-19-2003, 12:58 PM
|
#7 |
|
Shiro Usagi
Premium Member
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
|
Pull the motherboard from the case and try to get the system going that way. HAL9000's handy dandy new build troubleshooter.
Cricket
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
