|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
12-14-2003, 11:38 AM
|
#1 |
|
Member (7 bit)
Join Date: Aug 2002
Location: King, North Carolina
Posts: 113
|
Question about BIOS configuring DDR memory
Hello Guys, I built a new Computer A few Weeks ago and it is up and running and doing good. I've Got a question concerning the way BIOS recognizes my DDR GEIL Memory. First of all, my Intel Motherboard is model D845GERG2 and my CPU is an Intel Pentium 4, 2.4 GHz and my memory is DDRAM 512MB PC-400 Geil. Windows XP Pro is the operating System installed. When I go into BIOS, it only shows 256Mb memory installed. I switched the two sticks of 256Mb memory and there is no difference in the BIOS. It still reports only 256 Mb memory. Could my Motherboard be defective or what. Thanks for any help. JonDee
|
|
|
|
12-14-2003, 12:27 PM
|
#2 |
|
Member (14 bit)
Join Date: Mar 1999
Location: Christmas, Florida
Posts: 10,661
|
double check that you have the ram in the correct slots for ddr
to use the ddr you need two sticks dual channel |
|
|
|
|
12-14-2003, 01:22 PM
|
#3 |
|
Member (7 bit)
Join Date: Aug 2002
Location: King, North Carolina
Posts: 113
|
Thanks for your quick reply Bailey. There is only two slots on this motherboard for DDR memory and there is a stick of 256Mb in each one. I switched them and it still only says I have 256MB of DDR Memory. I have ggod memory because either one of them will be in slot 0 but not in slot 1.
|
|
|
|
|
12-14-2003, 01:30 PM
|
#4 |
|
Member (14 bit)
Join Date: Mar 1999
Location: Christmas, Florida
Posts: 10,661
|
then in that case there is a possibilty that you may have a bad mb
|
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
