|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Member (8 bit)
Join Date: Feb 2004
Location: virginia
Posts: 189
|
thermaltake case.gygabyte mobo, front usb connector pins dont match mobo connector pins,both companys say they use the standard configuration,except if you go to there site they use asus as example, anybody else run into this?
|
|
|
|
|
|
#2 |
|
Registered User
Join Date: Nov 2003
Location: new york
Posts: 374
|
yes they do
they're probably just labeled differently as mine were |
|
|
|
|
|
#3 |
|
Shiro Usagi
Premium Member
Join Date: Sep 1999
Location: Kaneohe, Hawaii
Posts: 34,002
|
Are the connectors from the front of the case a 1 piece thing or do the wires all have separate connectors?
If they have separate connectors, you're going to have to figure out the connections. Look the way the wires are layed out on the USB port on the front of the case and duplicate it on the USB header on the motherboard. If it's a 1 piece deal, then I think you're stuck. Cricket
|
|
|
|
|
|
#4 |
|
Member (8 bit)
Join Date: Feb 2004
Location: virginia
Posts: 189
|
cricket,its a one pice deal but im beginning to think the case wiring diagram in case manual is wrong,i have gygabyte mobo,cheacked a asus mobo,its pin configuration is the same,also the wiring color code to connector is different in case than that of manual,its all screwed up im about to just hook it up and see if it works,thanks
|
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|