|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
03-10-2004, 03:18 PM
|
#1 |
|
Member (3 bit)
Join Date: Dec 2003
Posts: 6
|
Pocket PC probs
Alrighty, i got my HP H1945 and whenever someone (my little brother) types the password incorrectly too much, apon typing the last digit of anything (the PW is 1220), it freezes (so u can type 1,2,2, but when u hit 0, the "button" on the screen turns from blue to black and just stays frozen. Its gotten to the point where nothing works, soft reset= whole thing starts over so I cant get into it.
Any help? Thanks in advance |
|
|
|
03-10-2004, 03:46 PM
|
#2 |
|
Member (9 bit)
Join Date: Dec 1999
Location: Midland, NC, USA
Posts: 292
|
Only thing I can think of at this point would be a hard reboot. Hope you haven't loaded anything on it that you don't want to lose or can't recreate. A hard reboot will basically return the handheld to its as-shipped state.
You'll need to look at the manual to see how to do a hard reset. Different manufacturers have different combinations of controls to hold down to make this happen. |
|
|
|
|
03-10-2004, 03:57 PM
|
#3 |
|
Member (3 bit)
Join Date: Dec 2003
Posts: 6
|
ok, I got important stuff backed up, will that matter? And the procedure is not in the manual
|
|
|
|
|
03-10-2004, 04:42 PM
|
#4 |
|
Member (11 bit)
Join Date: Jul 2002
Posts: 1,729
|
if you enter the password incorrectly 6 time it will lock the unit and wipe the memory completely. A hard reset it done by holding the two outside buttons (calandar & itask??) whilst pressing and holding the reset switch.
__________________
Better to use a Mac and be THOUGHT a fool, than to use Windows and REMOVE ALL DOUBT |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
