Case Problem w/ new MOBO ?

[jack_d12]

just got a new mobo and i'm looking for a new case. while i was installing this new mobo on my old case though i found out that the old case power led had 3 pins while the new mobo has 2 pins for it to attach to ??? now the power led doesn't light up but the hd let lights up ? is this going to be the case on my new case ??? also the new case i'm thinking about has 3 case fans is that enough for overclocking and thing like that ? http://cgi.ebay.com/ws/eBayISAPI.dll...EBWA%3AIT&rd=1 please give some opinions on this case

[Cricket]

You can actually just move the connectors on the 3 pin plug. On the back of the plug you can see which holes the wires are in. There is a small little flap that you can lift to take the connector out. You just need to know which wire to move. Look at the pins on the header and determine which one has the little mark next to it...that's the power pin and the other would be ground. On the plug, the colored wire is usually power and the black or white wire is ground.

Cricket

[JPMiller]

Looks like a good case... should be plenty of airflow...
Crickets right... you can change them around...
But you can also use a razor blade to remove the middle unused part of the plug... trim it down and then put the pins on seperately

[jack_d12]

sounds like a good idea jpmiller and cricket thanks for the hint. also i'm looking for a good cpu fan and heatsink for my overclocked 2600+ to 3000+ i'm looking for a blue led one http://cgi.ebay.com/ws/eBayISAPI.dll...473698058&rd=1 something like that but that's just a case fan. know of anyone that's good ?

[Cricket]

Get a Thermalright SLK-900A bare heatsink and buy a 80mm blue LED fan separately.

Cricket