|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
05-09-2004, 03:36 AM
|
#1 |
|
Member (2 bit)
Join Date: May 2004
Posts: 3
|
Connecting front USB ports
Hi,
Only my first build so probably a very simple question. My case has 2 front USB ports and there are 8 single pin connectors running from them labelled as: 1-D, 2-D, 1+5V, 2+5V, 1Ground, 2Ground, 1+D, 2+D. Can't seem to find any info on which connector goes where on the motherboard Very grateful for any help, Dave. |
|
|
|
05-09-2004, 03:39 AM
|
#2 |
|
Member (14 bit)
Join Date: Feb 2000
Location: Offenbach/Main (Germany)
Posts: 8,485
 |
Hello and welcome to PC Mech
You need the information on which connector goes where on the motherboard, coz if you do it wrong, you will fry them. Since the order of the pins is not standarized (hence you have 8 single connectors), only the motherboard manual can provide you that information. All I can tell you for sure is that all 4 "1-" connectors belong together, as do the other 4 "2-" connectors. Don't mix "1-" and "2-". What motherboard do you have ? RJ
__________________
All's right with the world when your PC is working right. 
|
|
|
|
|
05-09-2004, 03:47 AM
|
#3 |
|
Member (2 bit)
Join Date: May 2004
Posts: 3
|
Hi,
Its an ASUS A7V600-X - in the manual it lists the connections as +5V, P6-, P6+, GND, NC, P5-, P5+, +5V, GND, Cheers Dave |
|
|
|
|
05-09-2004, 03:52 AM
|
#4 |
|
Member (10 bit)
Join Date: Jun 2000
Location: Dorset UK
Posts: 559
|
|
|
|
|
|
05-09-2004, 04:17 AM
|
#5 |
|
Member (2 bit)
Join Date: May 2004
Posts: 3
|
Thats sorted it,
Thanks, Dave. |
|
|
|
|
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
