Go Back   PCMech Forums > Help & Discussion > Gaming and Benchmarks

Need Some Help? Type Your Keywords Here:

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 12-23-2005, 09:38 PM   #1
LoC
Member (9 bit)
 
Join Date: Aug 2003
Posts: 313
Problem with my computer?

ok so i have overclocked my system to the specifications below. using 3DMark03 my test results do not seem to reflect the power of my system. for instance, one comparison shows at 3200+ Venice core nearly beating my 3700+ San Diego core. how can this be? espiecally is his FSB is 29MHz lower than mine?

Comparison system:
3200+ Venice 0518 APDW 10x240HTT - 2xeVGA 6800U PCI-E SLI @425/1100 - 2x256MB KHX3200K2/512 BH-5 @240mhz 2-2-2-6 7-14-2222 3120 16x 7x - NF4 6.53 remix chipset driver, 76.10 310 OFFICIAL

General Information (both):
Operating System: Microsoft Windows XP
DirectX Version 9.0c

(me)ASUSTeK Computer INC. A8N-SLI DELUXE
(comparison) DFI Corp,LTD LP NF4 Series

CPU:
(me)AMD Athlon(tm) 64 2531MHz | (comparison)AMD Athlon(tm) 64 2400MHz
FSB:
(me) 230 MHz | (comparison) 201 MHz
Memory:
(me) 2048 MB | (comparison) 512 MB

CPU Score:
(me) 1164 | (comparison) 1127

as well, though the comparison uses dual 6800GTs as opposed to my single, the "Wings of Fury" test are only 10FPS apart while the rest are nearly double my performance. i can not figure why the first test has such similar results and the rest show his SLI setup.

others with lesser systems seem to be able to match my capabilities and greatly surpass my system. this REALLY gets me angry that i spent money on what seemed to be a great system yet is destroyed by everyone else in benchmarks.

Last edited by LoC; 12-23-2005 at 09:43 PM.
LoC is offline   Reply With Quote
Old 12-23-2005, 10:25 PM   #2
FLG
Member (11 bit)
 
FLG's Avatar
 
Join Date: May 2003
Location: Brooklyn, NY
Posts: 1,798
Send a message via AIM to FLG
Benchmarks are not make a system what it is, they are really useless and dont determine "real" world preformance. Dont worry about the benchmarks, because honestly most of them are not even noticable in a real world situation. The difference is cores on the processor might be why yours is getting beat.

Is your computer preforming well to your needs? lagging? As long as the computer is doing what you want it to, and at a speed your fine with...i seriously would remove all those benchmark prog's and start enjoying your system.
__________________
Xaser III
AMD 2400+ (no time to mess around with OC'ing)
Abit NF7-S
420w Enermax Noisetaker
Radeon 9800 PRO
80g Seagate 60g Westarn Digital
512 megs OCZ Enhanced latency PC3200 2-2-2-3
Swiftech MCP-650
Swiftech 6002A
And a Transmission cooler
Temps- 28C idle and load even @1.8v
Pics- (the first 6 are new ones) http://photobucket.com/albums/v231/-FLG-/
FLG is offline   Reply With Quote
Old 12-23-2005, 10:32 PM   #3
LoC
Member (9 bit)
 
Join Date: Aug 2003
Posts: 313
well i dont really lag or anything but i am curiosu to know why other people do so much better. as for core revisions, my CPU is less than 3 months old and is the San Diego core, which is the newest version.

EDIT: i was just looking at your picks and i have the same case, or similar, but in silver and red. i noticed you have both the right AND left side panels off (looking from the front, where the left panel is the standard access point). how did you get the left one off? i cannt figure it out.

Last edited by LoC; 12-23-2005 at 10:37 PM.
LoC is offline   Reply With Quote
Old 12-23-2005, 11:01 PM   #4
FLG
Member (11 bit)
 
FLG's Avatar
 
Join Date: May 2003
Location: Brooklyn, NY
Posts: 1,798
Send a message via AIM to FLG
If the left is the standard access one you mean the right correct? Its a real pain, just remove the thumb screws and then slide it back....last i remember it takes some strength to get it off, as its a tight fit. Just place your hand in the middle of the panel, get grip with your left on the back of the case and try to push it back.

As for the benchmarks, LoC dont sweat it man...just enjoy your pc.
FLG is offline   Reply With Quote
Old 12-24-2005, 12:17 AM   #5
Wx geek
 
blue60007's Avatar
 
Join Date: Aug 2005
Location: Indiana
Posts: 6,638
Don't worry about the benchmarks. There are too many factors to take into account as to why the numbers aren't as high as other people.

Make sure you close all background apps.
__________________
"It is the way of man to make monsters and it is the nature of monsters to destroy their makers."
blue60007 is offline   Reply With Quote
Old 12-24-2005, 11:34 AM   #6
LoC
Member (9 bit)
 
Join Date: Aug 2003
Posts: 313
FLG, i tried that before and got some movement, maybe 1 or 2mm but i am afraid i will break something. also, i cannt get a good grip on it because as soon as i pull back my hand slides. arghhh, oh well it isnt a big deal i was just curious :P
LoC is offline   Reply With Quote
Reply

Bookmarks

Still Need Help? Type Your Keywords Here:


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 01:43 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 PL2