|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Member (4 bit)
Join Date: Oct 2004
Location: Kentucky
Posts: 9
|
Hiya... My case came with no real instructions (darn you Raidmax) and I wanted to confirm my assumptions before I hooked anything up wrong.
My case has top mounted mic and headphone jacks with the following internal leads.... 1- MIC VCC 2- MIC DATA 3- GRND 4- EAR LEFT BLACK WIRE 5- EAR LEFT WHITE WIRE 6- EAR RIGHT BLACK WIRE 7- EAR RIGHT RED WIRE My mobo (ASUS A7N8X-E Deluxe) has 8 internal conectors for front audio ports and I was not sure which goes to which on all of them... 1- Mic2 2- AGND 3- MIC PWR 4- +5 VA 5- Line out R 6- BLine out R 7- Line out L 8- BLine our L the Line out and Ear connectors are pretty straightforward as well as the ground but which is the MIC VCC lead and is the MIC Data go to the Mic2 port?? I am assuming that the MIC VCC must be a power lead but does it go the MIC PWR and if so, what is the +5 VA for??? Thanks |
|
|
|
|
|
#2 | |||
|
Member (9 bit)
|
Quote:
mic data -> mic2 Line out R/L -> R/L white Bline out R/L -> r/l black GRND -> AGRND edit:dont worry about the +5
__________________
|
|||
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|